Brother International Quattro 6000D MY CUSTOM DESIGN - English - Page 32
Specifying the Width of Satin, Stitches, Specifying the Sewing Direction of, Fill Stitches
View all Brother International Quattro 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2. Specifying the Width of Satin Stitches 1 Press or beside . (The default setting is 2.0 mm when the application is started up.) To select a narrower width, press . To select a wider width, press . Each press of mm. makes the width narrower by 0.5 Each press of makes the width wider by 0.5 mm. A setting between 1.0 mm and 3.0 mm in 0.5 mm increments can be specified. Setting examples 1.0mm 2.0mm 3.0mm 3. Specifying the Sewing Direction of Fill Stitches 1 Press or beside . (The default setting is started up.) when the application is Each press of changes the setting in the following order: → → . Press to reverse the order of . Setting examples Notes • If the size of the created pattern is larger than 10 cm × 10 cm, it is recommended that be set in order to prevent shrinkage. 32