Brother International SC6600 Users Manual - English - Page 88
Fabric is caught in the, machine and cannot be, removed
View all Brother International SC6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
APPENDIX Fabric is caught in the machine and cannot be removed If the fabric is caught in the sewing machine and cannot be removed, the thread may have become tangled under the needle plate. Follow the procedure described below to remove the fabric from the machine. If the operation could not be completed according to the procedure, instead of attempting to complete it forcefully, contact your nearest authorized service center. ■ Removing the fabric from the machine Immediately stop the sewing machine. a Turn off the sewing machine. b Remove the needle. c If the needle is lowered into the fabric, turn the handwheel away from you (clockwise) to raise the needle out of the fabric, and then remove the needle. • Refer to "Replacing the needle" (page 29). Remove the presser foot and presser foot d holder. • Refer to "Replacing the presser foot" (page 33) and "Removing the presser foot holder" (page 34). Lift up the fabric and cut the threads below it. e If the fabric can be removed, remove it. Continue with the following steps to clean the bobbin case. Remove the needle plate cover. f Cut out the tangled threads, and then remove g the bobbin. Remove the bobbin case. h If threads remain in the bobbin case, remove them. a Bobbin case Use the cleaning brush or a vacuum cleaner to i remove any dust from the race and its surrounding area. a Cleaning brush b Race If the fabric could be removed If the fabric could not be removed Continue with step p. Continue with step j. a Needle plate cover release b Needle plate cover (front part) 86