Brother International SM1400 Operation Manual - Page 38
Using Optional Accessories
View all Brother International SM1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
USING ATTACHMENTS AND APPLICATIONS USING OPTIONAL ACCESSORIES L Sewing buttons Stitch Name Pattern Zigzag 2 Stitch Zigzag 3 Stitch Zigzag 4 Stitch Stitch Length [mm (inch)] 0.7 (1/32) 1.5 (1/16) 2 (1/16) Stitch Width [mm (inch)] 1.8 (1/8) 3.3 (3/16) 5 (3/16) Foot Other Button Sewing Darning Foot Plate "M" Button Sewing Darning Foot Plate "M" Button Sewing Darning Foot Plate "M" Measure the distance between the 1 buttonholes and set the pattern selection dial to the Zigzag Stitch with the desired width. Turn off the machine. 2 Change the foot to the button sewing foot 3 "M". Place the darning plate on the needle 4 plate. Put a button between the foot and the 6 fabric and make sure that the needle enters the holes without hitting the button. If it hits, see step 1. At a slow speed, sew about 10 stitches. 7 CAUTION ● Make sure the needle does not hit the button during sewing. The needle may break and you may be injured. Pull the upper thread at the end of the 8 stitching to the wrong side of the fabric, and then tie it with the bobbin thread. Use scissors to cut the upper thread and the bobbin thread at the beginning of the stitching. Turn on the machine. 5 CAUTION ● Do not turn on the machine while pressing down the foot controller. The machine may start unexpectedly and cause personal injury or damage to the machine. 37