Brother International SM2700 Operation Manual - Page 16
Threading The Machine
View all Brother International SM2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
KNOWING YOUR SEWING MACHINE THREADING THE MACHINE Winding the bobbin CAUTION ● We designed the bobbin that comes with this machine. If you use bobbins from other models, the machine will not work properly. Only use the bobbin that comes with this machine or bobbins of the same type (part code: SA156, SFB: XA5539-151). Using other bobbins may cause damage to the machine. Actual size 11.5 mm (7/16 inch) This model Other models 1 1 Pull the thread in completely. 2 3 1 Pre-tension disk 2 Bobbin winder shaft Pull up the spool pin and put a spool of 1 thread on this pin. 3 Bobbin While holding the thread from the spool 2 with your right hand, pass the thread toward you, in the groove on the thread guide. Then, pass the thread around the pre-tension disk and pull the thread in completely. 15 1 1 Pre-tension disk CAUTION ● If the spool of thread is in the wrong place, or is set incorrectly, the thread may tangle on the spool pin.