Brother International SQ-9000 Users Manual - English - Page 7
Knowing Your Sewing Machine - foot accessories
View all Brother International SQ-9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 KNOWING YOUR SEWING MACHINE 1 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS The main parts a Bobbin winder (page 12) This winds the thread onto the bobbin for use as the lower thread. b Spool pin (pages 12 and 17) This holds the spool of thread. c Hole for extra spool pin (page 24) This holds a second spool of thread for sewing with two needles. Not for lubrication. d Upper tension-control dial (page 31) This controls the tension of the upper thread. e Thread guide (pages 12 and 17) This is used when winding the thread onto the bobbin and then threading the machine. f Thread take-up lever (page 18) g Thread cutter (page 30) Pass the threads through the thread cutter to cut them. h Flat bed attachment with accessory compartment (pages 7 and 34) i Operation buttons (page 6) The operation buttons differ depending on the sewing machine model. j Operation panel (page 7) This is used to select the stitch and specify the various settings. k Handwheel Used to manually raise and lower the needle. l Main power and sewing light switch (page 9) You can turn the main power and sewing light switch on and off. m Jack/socket connector (page 9) Insert the plug on the power supply cord into the jack/ socket connector. n Foot controller jack/socket (page 10) Plug in the foot controller plug. o Feed dog position lever (pages 49 and 56) Use the feed dog position lever to lower the feed dogs. p Presser foot lever (page 17) Used to raise and lower the presser foot. q Foot controller (page 10) You can use this to control the sewing speed, and to start and stop sewing. r Handle Carry the sewing machine by its handle when transporting the machine. 5