Brother International T-8422C Basic Instruction Manual - English - Page 23
Test operation Operating the treadle
View all Brother International T-8422C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3. INSTALLATION 3-5. Test operation (Operating the treadle) CAUTION Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. 2114M Press the ON power switch (1). The power indicator (2) will illuminate. 2182B 2207B 2117M 1. Check that the machine sews at low speed when the treadle (3) is gently pressed to position (B). NOTE: If the sewing machine does not operate even when the treadle (3) is depressed, check the position of the safety switch. (Refer to "13-1. Safety switch position" in the instruction manual CD.) 2. Then check that it sews at high speed when the treadle (3) is gently pressed to position (C). 3. After pressing the treadle (3) forward, check that the needle is lowered to the top of the needle plate when the treadle (3) is returned to the neutral position (A). (when needle down stopping has been set.) 4. If the treadle (3) is pressed to position (D), (thread trimming is carried out for models with thread trimmer) and the needle rises above the needle plate and stops. 5. With the machine head tilted back, depress the treadle (3) and check that the sewing machine does not operate. NOTE: If the sewing machine operates when the treadle (3) is depressed while the machine head is tilted back, the safety switch is probably faulty. Contact the place of purchase. T-8421C, 8422C, 8452C, 8722C, 8752C 15