Brother International TD-2020 P-touch Template Manual/ Command Reference - Page 41
^PS Specify print start command text string, ≤n1≤2, 00h≤datah≤FFh
![]() |
View all Brother International TD-2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
P-touch Template 2.0 Command Reference ^PS Specify print start command text string ASCII: ^ P S n1 n2 Decimal: 94 80 83 nd1 nd2 Hexadecimal: 5E 50 53 nh1 nh2 data datad datah Parameters 0≤n1≤2 0≤n2≤9 00h≤datah≤FFh Description Specifies the text string for the print start command. (n1*10)+n2: Length of the text string (can be set between 1 and 20) data: Text string (The maximum number of characters that can be set is 20 characters (bytes).) The default text string for the print start command is "^FF". This command is a dynamic command. Remarks Invalid if more than 20 characters have been specified Example To change the text string for the print start command to "START": Since the text string to be specified (data), "START", contains 5 characters, n1=0 and n2=5. Therefore, the command will be as follows. ^ P S 0 5 S TAR T (5Eh 50h 53h 30h 35h 53h 54h 41h 52h 54h) - 35 - 7. Control Command Details
![](/manual_guide/products/brother-international-td2020-ptouch-template-manual-command-reference-59e3037/41.png)