Brother International TD-2120N Raster Command Reference - Page 9

Print Data, 2.1 Print data overview, Command Name

Get Brother International TD-2120N PDF manuals and user guides View all Brother International TD-2120N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Raster Command Reference 2. Print Data 2.1 Print data overview The print data is constructed of the following: (1) initialization commands, (2) control codes, (3) raster data, and (4) print commands. If the print job consists of multiple pages, (2) through (4) are repeated. (1) Initialization commands Specified only once at the beginning of the job. Sequence Command Name Description/Example 1 Invalidate Sends a 200-byte invalidate command, and then resets the printer to the receiving state. 2 Initialize Initializes for printing. 1Bh, 40h (Fixed) (2) Control codes Added at the beginning of each page and sent for each page. Sequence Command Name Description/Example 1 Switch dynamic command mode Switches the printer to raster mode. 1Bh, 69h, 61h, 01h Updates the media information for the printer. 2 Additional media information command 1Bh, 69h, 55h, 77h, 01h, 127 bytes of media information Note If the media information is the same as when printing was last performed, it is unnecessary to send the additional media information command. 3 Print information command Sets the print information for the printer. For 58-mm-wide continuous length tape on the 300 dpi model: 1Bh, 69h, 7Ah, C6h, 0Ah, 3Ah, 00h, 0Ah, 01h, 00h, 00h, 00h, 00h 4 Various mode settings When the peeler function is enabled: 1Bh,69h,4Dh,10h 5 Specify margin amount Specifies the amount of the margins. For 3 mm margins on the 300 dpi model: 1Bh, 69h , 64h, 23h, 00h 6 Select compression mode Selects the compression mode for raster graphics. To send the data compressed to TIFF format: 4Dh, 02h - 5 2. Print Data

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
Raster Command Reference
- 5 -
2. Print Data
2. Print Data
2.1 Print data overview
The print data is constructed of the following: (1) initialization commands, (2) control codes, (3) raster data,
and (4) print commands. If the print job consists of multiple pages, (2) through (4) are repeated.
(1) Initialization commands
Specified only once at the beginning of the job.
Sequence
Command Name
Description/Example
1
Invalidate
Sends a 200-byte invalidate command, and then resets the printer
to the receiving state.
2
Initialize
Initializes for printing.
1Bh, 40h (Fixed)
(2) Control codes
Added at the beginning of each page and sent for each page.
Sequence
Command Name
Description/Example
1
Switch dynamic
command mode
Switches the printer to raster mode.
1Bh, 69h, 61h, 01h
2
Additional media
information
command
Updates the media information for the printer.
1Bh, 69h, 55h, 77h, 01h, 127 bytes of media information
Note
If the media information is the same as when printing was
last performed, it is unnecessary to send the additional
media information command.
3
Print information
command
Sets the print information for the printer.
For 58-mm-wide continuous length tape on the 300 dpi model:
1Bh, 69h, 7Ah, C6h, 0Ah, 3Ah, 00h, 0Ah, 01h, 00h, 00h, 00h, 00h
4
Various mode
settings
When the peeler function is enabled:
1Bh,69h,4Dh,10h
5
Specify margin
amount
Specifies the amount of the margins.
For 3 mm margins on the 300 dpi model:
1Bh, 69h , 64h, 23h, 00h
6
Select compression
mode
Selects the compression mode for raster graphics.
To send the data compressed to TIFF format:
4Dh, 02h