Brother International TD-2120N P-touch Template Manual/ Command Reference - Page 24
Initialize P-touch Template, Step 5: With the P-touch Template 2.0 commands
![]() |
View all Brother International TD-2120N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
P-touch Template 2.0 Command Reference Step 5: With the P-touch Template 2.0 commands, select the assigned number for the bitmap file. After using the P-touch Template Settings tool in Step 4, the remaining three commands must be sent to the printer. (1) Initialize P-touch Template (2) Select the bitmap file to be printed. In order to select the bitmap file, enter a specific character "\" and the value one less than the assigned number for the bitmap file that is shown in Step 3. For example, if the assigned number for the bitmap file is 2, enter \01 as shown right. The command \01 is written in Hexadecimal : 5C 30 31 (3) Start printing. When the printer receives the command above, the label below is printed. - 18 - 3. Examples for Using Commands
![](/manual_guide/products/brother-international-td2020-ptouch-template-manual-command-reference-59e3037/24.png)