Brother International TD-2125NWB Users Guide TD-2020A/2125NWB/2135NWB - Page 22
Using Infrastructure Mode and Wireless Direct Simultaneously, Using Wi-Fi Protected Setup™ (WPS)
View all Brother International TD-2125NWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 2 c On the printer, simultaneously press and hold the (Print), (Feed), and (Power) buttons until the POWER indicator and STATUS indicator blink in green alternately. d Release the (Feed) and the (Print) buttons (keep pressing the (Power) button). e You can change the connection mode by pressing the (Print) button (keep pressing the (Power) button). The flashing indicator changes each time you press the (Print) button and it toggles between the connection modes. f Release the (Power) button when the Power and Wi-Fi indicators are both lit in green. g Use your computer or mobile device to select the SSID of the printer ("DIRECT*****_TD-2135NWB"). If required, type the Password ("213*****", where***** is the last five digits of the printer's serial number). NOTE • The serial number label is located on the base of the printer. If necessary, confirm the serial number by printing the printer information. • Use the "Printer Setting Tool" to change the printer's network settings. • Use the "Printer Setting Tool" to apply network settings to multiple printers at the same time. • You cannot connect to the Internet via Wi-Fi while using Wireless Direct. To use the Internet, connect using a Wi-Fi router/ access point (Infrastructure Mode). • We recommend setting a new Wireless Direct password using the "Printer Setting Tool" to protect your printer from unauthorized access. Using Infrastructure Mode and Wireless Direct Simultaneously 2 Wireless Direct allows you to connect the printer to your computer or mobile device directly, without a Wi-Fi router /access point. The printer serves as a Wi-Fi access point. a Set the printer to Infrastructure Mode and Wireless Direct. • Using a Windows computer: a. Launch the "Printer Setting Tool" on your computer. b. Click the Communication Settings button. c. Click General > Communication Settings. d. Confirm that the Infrastructure and Wireless Direct option is selected for the Selected Interface setting. Using Wi-Fi Protected Setup™ (WPS) 2 a Confirm that your Wi-Fi router/access point has the WPS symbol. If this symbol is not visible, you must use a different connection method. b Place the printer within the range of your Wi-Fi router/access point. The range may differ depending on your environment. See the instructions provided with your Wi-Fi router/access point. c Press and hold (Feed) button for ten seconds until STATUS indicator blinks in green. 16