Brother International TD-4520DN Raster Command Reference - Page 18
Command Name, Description
View all Brother International TD-4520DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Raster Command Reference Descriptions for the numbers in the print data on the previous page are provided in the following table. For details on each command, refer to "7. Printing Command Details". No. Command Name Description 1 Invalidate A 350-byte invalidate command is sent. 2 Initialize The "initialize" command is sent. 3 Switch dynamic command mode The printer is switched to raster mode. Send this command before sending raster data to the printer. Switch automatic 4 status notification mode Dynamically switches whether an automatic status notification is given during printing. 5 Job ID setting commands Internal specification commands. Since this is a command for outputting with the commercial version of the driver, it is unnecessary for the user to send this command. 6 Additional media Additional media information on the media size is sent. information command This is the command for "4" x 6" (102 mm x 152 mm)". 7 Print information command Media size information for the print data is sent. This is the command for "4" x 6" (102 mm x 152 mm)" die-cut label. 8 Various mode settings This command specifies the settings such as cut options. Normally no settings required here. Specify the page The number of pages printed before automatically cutting is 9 number in "cut each * specified. labels" Here, "auto cut" is specified. 10 Expanded mode This is the command for specifying expanded functions. Here, "cut at end" is specified. 11 Specify waiting time after printing each page This command specified the length of time to wait after printing every single page. 12 Specify margin amount This command specifies the amount of margins. 13 Select compression mode TIFF compression mode is selected. 14 Raster data Raster data continues. 15 Print command with feeding Since one page will be printed, this is sent at the end of the first page. 16 Switch dynamic command mode This command resets to default mode that is switched by No.3. Send this command after [Print command with feeding] is sent. - 12 - 4. Print Data