Brother International TD-4520DN ESC/ P Command Reference

Brother International TD-4520DN Manual

Get Brother International TD-4520DN PDF manuals and user guides View all Brother International TD-4520DN manuals
Add to My Manuals
Save this manual to your list of manuals

Brother International TD-4520DN manual content summary:

  • Brother International TD-4520DN | ESC/ P Command Reference - Page 1
    Software Developer's Manual ESC/P Command Reference RJ-4230B/4250WB RJ-3230B/3250WB RJ-2030/2050/2140/2150 TD-4410D/4420DN/4510D/4520DN/4550DNWB/4210D TD-2020/2120N/2130N Version 3.02
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 2
    , Ltd. All rights reserved. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and, any use of such marks by Brother Industries, Ltd. is under license. Zebra, ZPL and ZPL II are registered trademarks of ZIH Corporation. BarStar Pro Encode Library (PDF417, Micro PDF417, DataMatrix
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 3
    you in controlling your Printer (Please refer to "Appendix A: Supported Printers"). You may use the Documentation only if you first agree Documentation or Printer Model will be performed at the sole discretion of Brother. Brother may not respond to any request or inquiry about the Documentation.
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 4
    ESC/P Command Reference Contents Introduction 1 What is ESC/P 2 1. Using ESC/P Commands 3 2. Examples of Using ESC/P Commands 5 3. ESC/P Command Limitations 11 3.1 Print area...11 3.2 Characters...13 3.2.1 Character sizes 13 3.2.2 Character pitches 14 3.3 Print position...15 3.3.1
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 5
    style 104 Select default font 105 Retrieve default font 106 Specify default character size 107 Retrieve default character size 107 Specify default line feed 108 Retrieve default line feed 108 Select default alignment 109 Retrieve default alignment 109 Specify default page length 110
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 6
    default landscape orientation 111 ESC iXL1 Retrieve default landscape orientation 111 ESC iXj2 Select default international character set 112 ESC iXj1 Retrieve default international character set 113 ESC iXm2 Select default change lock 122 Appendix A: Supported Printers 123 Appendix B:
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 7
    appear in the screens in this manual as the name of your printer. We accept no responsibility for any problems caused by programs that you material, affecting software, data or hardware, including the printer, and any problems resulting directly or indirectly from them. Use this material only if you
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 8
    ESC/P Command Reference What is ESC/P? ESC/P is one type of control codes used for printers. With the codes introduced in this document, various labels can be created and printed. In this document, ESC/P codes are provided as both ASCII and binary codes. When sending codes to the printer, make sure
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 9
    ESC/P Command Reference 1. Using ESC/P Commands Below is a description of the flow for creating documents. Also refer to "2. Examples of Using ESC/P Commands". (1) Start ESC/P 1. Switch the command mode. - Switch command mode (ESC i a 0) Note: ESC/P mode 2. Initialize - Initialize (ESC @) (2)
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 10
    ESC/P Command Reference (4) Text operations 1. Specify the character set. - Select font (ESC k) - Select character code (ESC t) - Select international character set (ESC R) - Specify character size (ESC X) - Specify the character spacing (ESC P, ESC M, ESC SP) 2. Specify the character style. -
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 11
    ESC/P Command Reference 2. Examples of Using ESC/P Commands Set Basic setup first. Basic setup 1) Register a media to be used. 2) Specify ESC/P command mode. Basic set up 1: Register a media to be used Register a media with the Custom Label tool. Note: The media size to be used is also able to be
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 12
    ESC/P Command Reference This is the label that will be made. Step 1: Landscape 1 inch Step 3: Horizontal position 5 inches Step 2: Page length 1 inch Step 4: Vertical position Step 5: Font type: Helsinki (proportional pitch) Step 6: Character size: 100 dots In order to make this label, the
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 13
    ESC/P Command Reference Step 2: Specify the page length. ESC (C Specify page length 5inches ASCII: ESC ( C nL nH mL mH Decimal: 27 40 67 nL nH mL mH Hexadecimal: 1B 28 43 nL nH mL mH Parameters nL=2, nH=0 0≤（mL+mH*256）
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 14
    Step 4: Specify the vertical position. ESC/P Command Reference 1 inch 1 inch=203 dots Vertical position=mL+mH*256=203 109 0 CBh 00h Step 5: Select the font type. = = = = Entered command nL nH mL mH ESC ( V 02h 00h CBh 00h Example: A case 203dpi printer is used Font type: Helsinki Outline Fonts
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 15
    Step 6: Specify the character size. ESC/P Command Reference Character size: 100 dots = = = = Character size=nL+nH*256=100 dots 100 0 64h 00h Entered command m nL nH ESC X 00h 64h 00h Example: A case 203dpi printer is used - 9 - 2. Examples of Using ESC/P Commands
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 16
    ESC/P Command Reference All commands together will make the example label shown below. ESC i a 00h ESC @ ESC i L 01h ESC ( C 02h 00h C7h 03h ESC $ CBh 00h ESC ( V 02h 00h CBh 00h ESC k 0Bh ESC X 00h 64h 00h At your side FF Select ESC/P mode Binary command: 1B 69 61 00 Initialize ESC/P mode Binary
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 17
    ESC/P Command Reference 3. ESC/P Command Limitations 3.1 Print area The printing media are continuous, die-cut labels and media with marks. The area that can physically be printed on depends on the paper settings. Die-cut labels Top margin Bottom margin Unprintable area Unprinted area Left
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 18
    Printable Height Label Print area Label width Top margin Left margin Printable width Bottom margin ESC/P Command Reference Right margin Label spacing Thermal head * To specify media settings, use the Custom Label Tool. Note: The maximum length of printable area is 3m when a continuous label
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 19
    ESC/P Command Reference 3.2 Characters This system uses single-byte character codes and is installed with 6 bitmap fonts (Letter Gothic Bold, Helsinki, Gothic, Brussels, San Diego and Brougham) and 4 outline fonts (Letter Gothic, Brussels, Helsinki and Gothic). Fixed pitch or proportional pitch can
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 20
    ESC/P Command Reference 3.2.2 Character pitches Pitch refers to the spacing between neighboring characters. When characters are arranged with a fixed pitch, they will be evenly spaced. If characters extend over several lines, they will align in straight rows. a b c a b c Fixed spacing Fixed
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 21
    ESC/P Command Reference 3.3 Print position The print position is the standard position for printing characters, bitmaps, and barcodes. There is a horizontal print position and vertical print position, which are the reference points for vertical position movement and horizontal position movement.
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 22
    ESC/P Command Reference 3.4 Line feed amount The amount of line feed is the amount of vertical movement from the print position of one line to the print position of the next line. HHHHHHHHHHHHH HHHHHHHHHHHHH HHHHHHHHHHHHH Line feed amount The line feed amount is specified with ESC 0, ESC 2, ESC
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 23
    ESC/P Command Reference 4. Control Code List Character/style selection commands (Refer to section 5.1 Character/style selection commands.) Commands Description Note ESC R ESC q ESC k ESC t Select international character set Select character style Select font Select character code set Text
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 24
    ESC/P Command Reference Line feed commands (Refer to section 5.3 Line feed commands.) Commands Description Note ESC 0 ESC 2 ESC 3 ESC A Specify line feed of 1/8 inch Specify line feed of 1/6 inch Specify minimum line feed Specify line feed of n/60 inch Horizontal movement commands (Refer to
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 25
    5.7 Printer control commands.) Commands Description Note ESC @ ESC iUx Initialize (defaults) Reboot Graphics commands (Refer to section 5.8 Graphics commands.) Commands Description Note Specify cutting Specify recovery setting Only TD-4XXX printer supports. - 19 - 4. Control Code List
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 26
    style Select default font Retrieve default font Specify default character size Retrieve default character size Specify default line feed Retrieve default line feed Select default alignment Retrieve default alignment Specify default page length Retrieve default page length Select default landscape
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 27
    America n=13: South Korea n=64: Legal  The following 12 codes are switched. 23h, 24h, 40h, 5Bh, 5Ch, 5Dh, 5Eh, 60h, 7Bh, 7Ch, 7Dh, 7Eh  The default setting is n=0 (U.S.A.) Example Code: 5Ch ESC R 08h 5Ch FF Print result: \ ￥ - 21 - 5. Control Command Details
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 28
    ESC q Select character style ASCII: ESC q n Hexadecimal: 1B 71 n Parameters 0≤n≤3 Description  Selects the character style. n=0: None (normal characters) n=1: Outline n=2: Shadow n=3: Shadow and outline Example Code: ABC ESC q 02h ABC ESC q 00h ABC FF Print result: ABC ABC ESC/P Command
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 29
    from an outline font to bitmap font, the character size is changed to default setting (24 dots).  If the selected font is not supported current size setting, character size is changed to the default setting (24 dots).  Proportional pitched Gothic is forced to be selected when a character
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 30
    Font sample ESC/P Command Reference - 24 - 5. Control Command Details
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 31
    code set used. n=0: Standard character code set n=1: Eastern European character code set n=2: Western European character code set n=3: Reserved n=4: Japanese character code set  The default setting is n=0.  Invalid if n is a value outside of the allowable range. - 25 - 5. Control Command Details
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 32
    5.2 Text printing commands ESC 4 Apply italic style ASCII: ESC 4 Hexadecimal: 1B 34 Parameters None Description  Prints the subsequent text in italics.  This command is valid anywhere in a text line. ESC 5 Cancel italic style ASCII: ESC 5 Hexadecimal: 1B 35 Parameters None
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 33
    ESC E Apply bold style ASCII: ESC E Hexadecimal: 1B 45 Parameters None Description  Prints the subsequent text in bold.  This command is valid anywhere in a text line. ESC F Cancel bold style ASCII: ESC F Hexadecimal: 1B 46 Parameters None Description  Cancels the bold style.  This
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 34
    ESC G Apply double-strike printing ASCII: ESC G Hexadecimal: 1B 47 Parameters None Description  Prints the subsequent text in bold.  This command is valid anywhere in a text line. ESC H Cancel double-strike printing ASCII: ESC H Hexadecimal: 1B 48 Parameters None Description  Cancels
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 35
    ESC/P Command Reference ESC P Apply pica pitch (10 cpi) ASCII: ESC P Hexadecimal: 1B 50 Parameters None Description  Prints the subsequent text with the pica pitch (10 characters/inch).  The character spacing is 20 dots (30 dots for 300dpi printers).  If the character width is 20(or 30)
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 36
    Example For a 15-dot font at full width: Full width 15 dots Ａ Ｂ 5 dots ESC/P Command Reference Double width 30 dots Ａ Ｂ 10 dots - 30 - 5. Control Command Details
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 37
    ESC/P Command Reference ESC M Apply elite pitch (12 cpi) ASCII: ESC M Hexadecimal: 1B 4D Parameters None Description  Prints the subsequent text with the elite pitch (12 characters/inch).  The character spacing is 16 dots (25 dots for 300dpi printers).  If the character width is 16(or 25)
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 38
    ESC/P Command Reference ESC g Apply micron pitch (15 cpi) ASCII: ESC g Hexadecimal: 1B 67 Parameters None Description  Prints the subsequent text with the micron pitch (15 characters/inch).  This command is not applied to 203dpi printers.  The character spacing is 20 dots.  If the
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 39
    ESC/P Command Reference ESC p Specify proportional characters ASCII: ESC p n Hexadecimal: 1B 70 n Parameters n=0, 1, 48 ("0"), 49 ("1") Description  Specifies proportional characters. n=1 or 49 ("1"): Specifies proportional characters. n=0 or 48 ("0"): Cancels proportional characters.  If
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 40
    ESC/P Command Reference SO Specify auto-canceling stretched characters ASCII: SO Hexadecimal: 0E Parameters None Description  Prints the subsequent text at double width.  This command is canceled with DC4, CR, LF, VT, FF, ESC J, or an automatic line feed.  This command is canceled with ESC
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 41
    SI Specify compressed characters ASCII: SI Hexadecimal: 0F Parameters None Description  Prints the subsequent text at half width. ESC SI Specify compressed characters ASCII: ESC SI Hexadecimal: 1B 0F Parameters None Description  Same as SI ESC/P Command Reference - 35 - 5. Control
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 42
    DC2 Cancel compressed characters ASCII: DC2 Hexadecimal: 12 Parameters None Description  Cancels compressed characters specified with SI. DC4 Cancel auto-canceling double-width characters ASCII: DC4 Hexadecimal: 14 Parameters None Description  Cancels double-width characters specified
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 43
    ESC/P Command Reference ESC - Apply/cancel underlining ASCII: ESC - n Hexadecimal: 1B 2D n Parameters n=0, 1, 2, 3, 4 or 48 ("0"), 49 ("1"), 50 ("2"), 51 ("3"), 52 ("4") Description  Applies or cancels underlining. n=4 or 52 ("4"): Applies underlining with a width of 4 dots. n=3 or 51
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 44
    ESC/P Command Reference ESC ! Global formatting ASCII: ESC ! n Hexadecimal: 1B 21 n Parameters 0≤n≤255 Description  Specifies a combination of print modes.  Specifies modes depending on the bit value of n.  When the ESC ! code is used, a combination of multiple print modes can be
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 45
    spacing ASCII: ESC SP n Hexadecimal: 1B 20 n Parameters 0≤n≤127 Description  Specifies the character spacing.  n indicates the number of dots.  The default setting is 0 dot.  With double-width characters, the character spacing is doubled; with half-width characters, it is halved. - 39
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 46
    ESC/P Command Reference ESC X Specify character size ASCII: ESC X Hexadecimal: 1B 58 m nL nH m nL nH Parameters Character width: The value of m is irrelevant. Character size: Valid only with: nL=16, 24, 32, 48 dots nH=0 The maximum is: nL=144 nH=1
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 47
    5.3 Line feed commands ESC 0 Specify line feed of 1/8 inch ASCII: ESC 0 Hexadecimal: 1B 30 Parameters None Description  Specifies a line feed of 1/8 inch (about 0.32 cm). ESC 2 Specify line feed of 1/6 inch ASCII: ESC 2 Hexadecimal: 1B 32 Parameters None Description  Specifies a line
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 48
    ESC 3 Specify minimum line feed ASCII: ESC 3 n Hexadecimal: 1B 33 n Parameters 0≤n≤255 Description  Specifies a line feed of n dots per line. ESC A Specify line feed of n/60 inch ASCII: ESC A n Hexadecimal: 1B 41 n Parameters 0≤n≤255 Description  Specifies a line feed of n/60 inch.
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 49
    ESC/P Command Reference 5.4 Horizontal movement commands ESC l Specify left margin ASCII: ESC l n Hexadecimal: 1B 6C n Parameters 0≤n≤255 0≤left margin
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 50
    ESC/P Command Reference  The horizontal print position is moved to the left margin position.  If the left margin setting is not at the beginning of the line, the left margin is specified after a line feed. The beginning of the line indicates the left margin position for left alignment; for right
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 51
    ESC/P Command Reference ESC Q Specify right margin ASCII: ESC Q n Hexadecimal: 1B 51 n Parameters 1≤n≤255 Left margin
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 52
    ESC/P Command Reference CR Carriage return ASCII: CR Hexadecimal: 0D Parameters None Description  Ends input of a line, and waits for input of the next line.  The next print position becomes the beginning of the next line.  A line feed command immediately after the carriage return is
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 53
    ESC/P Command Reference ESC D Specify horizontal tab position ASCII: ESC D Hexadecimal: 1B 44 ［n］k ［n］k NUL 00h Parameters 1≤n≤255, 0≤k≤32 Description  The horizontal tab position is the character width (when the command was specified)*n from the left margin.  Enter n values in
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 54
    ESC/P Command Reference HT Perform horizontal tab ASCII: HT Hexadecimal: 09 Parameters None Description  Moves the horizontal print position to the nearest horizontal tab position to the right of the input position.  If there is no horizontal tab position to the right of the input position,
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 55
    ESC/P Command Reference ESC $ Specify absolute horizontal position ASCII: ESC $ n1 n2 Hexadecimal: 1B 24 n1 n2 Parameters 0≤n1≤255, 0≤n2≤255 Description  Specifies the absolute print position (in dots) for the next data.  An absolute print position specifies the next print position as a
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 56
    of n. n=0 or 48 ("0"): Applies left alignment. n=1 or 49 ("1"): Applies center alignment. n=2 or 50 ("2"): Applies right alignment. n=3 or 51 ("3"): Applies nothing.  The default setting is n=0.  Data is aligned between the left and right margins by entering a CR, LF, and FF code or by buffer
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 57
    the amount specified by a line feed command (ESC 0, ESC 2, ESC 3, ESC A).  The print position becomes the beginning of the next line.  The default value is a line feed of 32 dots.  A carriage return immediately after a line feed is ignored.  Auto-canceling double-width characters specified with
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 58
    ESC/P Command Reference ESC J Forward paper feed ASCII: ESC J n Hexadecimal: 1B 4A n Parameters 0≤n≤255 Description  Ends input for the current line and moves the vertical print position forward by n dot.  If the bottom margin setting is exceeded, printing starts.  With left alignment, the
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 59
    ESC/P Command Reference ESC B Specify vertical tab position ASCII: ESC B Hexadecimal: 1B 42 ［n］k ［n］k NUL 00h Parameters 1≤n≤255 0≤k≤16 Description  The vertical tab position is the line feed amount (when this command was specified)*n from the top margin.  Enter n values in ascending order
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 60
    ESC/P Command Reference VT Perform vertical tab ASCII: VT Hexadecimal: 0B Parameters None Description  Moves the print position to the nearest vertical tab position down from the input position.  The next horizontal print position becomes the beginning of the line.  If the next vertical
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 61
    ESC/P Command Reference ESC (V Specify absolute vertical position ASCII: ESC （ V Hexadecimal: 1B 28 56 nL nH mL mH nL nH mL mH Parameters nL=2 nH=0 0≤mL≤255 0≤mH≤127 Description  Specifies the vertical print position as an absolute position from the top margin position. Vertical position=mL+
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 62
    ESC/P Command Reference ESC (v Specify relative vertical position ASCII: ESC （ v Hexadecimal: 1B 28 76 nL nH mL mH nL nH mL mH Parameters nL=2 nH=0 0≤mL≤255 0≤mH≤63, 192≤mH≤255 -16384≤（mL+mH*256）≤16383 Description  Specifies the vertical print position as a relative position from the current
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 63
    ESC/P Command Reference 5.6 Paper formatting commands ESC (c Specify page format ASCII: ESC （ c nL nH tL tH BL BH Hexadecimal: 1B 28 63 nL nH tL tH BL BH Parameters nL=4, nH=0 （tL+tH*256）
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 64
    ESC/P Command Reference ESC (C Specify page length ASCII: ESC ( C nL nH mL mH Hexadecimal: 1B 28 43 nL nH mL mH Parameters nL=2, nH=0 0≤（mL+mH*256）
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 65
    control commands ESC @ Initialize ASCII: ESC @ Hexadecimal: 1B 40 Parameters None Description  Returns all commands to their default settings. (See below.) Item Default Input buffer Saved Text buffer Cleared Print buffer Cleared Top margin 0 dot Bottom margin Depends on media
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 66
    ESC/P Command Reference ESC i U x Reboot ASCII: ESC i U x Hexadecimal: 1B 69 55 78 Parameters None Description  Reboot the printer.  This is a raster command. Please change the mode before sending this command. Please refer to ESC i a Switch command mode. - 60 - 5. Control Command Details
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 67
    ESC/P Command Reference 5.8 Graphics commands ESC * Select bit image ASCII: ESC * m Hexadecimal: 1B 2A m n1 n2 Data n1 n2 Data Parameters m=0, 1, 2, 3, 4, 6, 32, 33, 38, 39 The image data is as follows: - n1+n2*256 bytes when m=0, 1, 2, 3, 4, 6 - (n1+n2*256)*3 bytes
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 68
    ESC/P Command Reference When m=0, 1, 2, 3, 4, 6  n1 and n2 indicate the number of dot positions. n1: The remainder from dividing the number of dot positions by 256 n2: The quotient from dividing the number of dot positions by 256 B7 B6 B5 B4 B3 B2 B1 B0 Relationship between the image data and the
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 69
    ESC/P Command Reference When m=32, 33, 38, 39  n1 and n2 indicate the number of dot positions. n1: The remainder from dividing the number of dot positions by 256 n2: The quotient from dividing the number of dot positions by 256 1st byte BBBBBBBB 7 6 5 4 3 2 1 0 2nd byte BBBBBBBB 7 6 5 4 3 2 1 0
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 70
    ESC/P Command Reference  One dot of the image data is enlarged as follows, according to the value of m. m=32 m=33 m=38 m=39  As a result, the image is sized depending on the value of m, as follows: m=32 24 dots vertically×(n1+n2*256)*4 dots horizontally m=33 24 dots vertically×(n1+n2*256)*2
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 71
    ESC/P Command Reference ESC * Select bit image ASCII: ESC * m Hexadecimal: 1B 2A m n1 n2 Data n1 n2 Data Parameters m=0, 1, 2, 3, 4, 6, 32, 33, 38, 39, 40, 71, 72, 73 The image data is as follows: - n1+n2*256 bytes when m=0, 1, 2, 3, 4, 6 - (n1+n2*256)*3 bytes when m=32
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 72
    ESC/P Command Reference When m=0, 1, 2, 3, 4, 6  n1 and n2 indicate the number of dot positions. n1: The remainder from dividing the number of dot positions by 256 n2: The quotient from dividing the number of dot positions by 256 B7 B6 B5 B4 B3 B2 B1 B0 1byte 1byte 1byte 1byte 1byte 1byte
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 73
    ESC/P Command Reference When m=32, 33, 38, 39, 40  n1 and n2 indicate the number of dot positions. n1: The remainder from dividing the number of dot positions by 256 n2: The quotient from dividing the number of dot positions by 256 1st byte BBBBBBBB 7 6 5 4 3 2 1 0 2nd byte BBBBBBBB 7 6 5 4 3 2
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 74
    ESC/P Command Reference  One dot of the image data is enlarged as follows, according to the value of m. m=32 m=33 m=38 m=39 m=40  As a result, the image is sized depending on the value of m, as follows: m=32 48 dots vertically×(n1+n2*256)*6 dots horizontally m=33 48 dots vertically×(n1+
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 75
    ESC/P Command Reference When m=71, 72, 73  n1 and n2 indicate the number of dot positions. n1: The remainder from dividing the number of dot positions by 256 n2: The quotient from dividing the number of dot positions by 256 1st byte BBBBBBBB 7 6 5 4 3 2 1 0 2nd - 5th byte BBBBBBBB 7 6 5 4 3 2 1
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 76
    ESC/P Command Reference 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte 1byte First, the data is lined up in six rows as follows: MSB
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 77
    ESC/P Command Reference ESC K 8-dot single-density bit image ASCII: ESC K n1 n2 Data Hexadecimal: 1B 4B n1 n2 Data Parameters 0≤n1≤255, 0≤n2≤3 The data contains n1+n2*256 bytes of image data. Description Specifies that an 8-dot single-density bit image is printed with the number of dot
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 78
    ESC/P Command Reference ESC Y 8-dot double-speed double-density bit image ASCII: ESC Y n1 n2 Data Hexadecimal: 1B 59 n1 n2 Data Parameters 0≤n1≤255, 0≤n2≤3 The data contains n1+n2*256 bytes of image data. Description  Same as for an 8-dot double-density bit image. Horizontally neighboring
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 79
    t1: ITF (I-2/5) t5: EAN-8, EAN-13, UPC-A t6: UPC-E t9: CODABAR ta: CODE128 tb: GS1-128 (UCC/EAN-128) tc: GS1 Databar(RSS) td: CODE93 te: POSTNET tf: UPC/EAN EXTENSION tg: MSI/Plessey th: Intelligent Mail Barcode s (style) Ignored p (number of passes) Ignored R or r r0
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 80
    ESC/P Command Reference h (height) h n1 n2 Height=n1+n2*256 (dots) 48≤height≤480 If height480, height=480. However, the height is as shown below with tc. 131≤height≤Maximum width (GS1 Databar Standard) 71≤height≤Maximum width (GS1 Databar Truncated) 71≤height≤Maximum
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 81
    ESC/P Command Reference (A barcode with a large number of stacked rows may be considered out of specifications and unreadable by the reader.) - 75 - 5. Control Command Details
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 82
    Databar Limited) 1-64 numbers or 1-40 letters* (for GS1 Databar Expanded) * ISO646 characters can be printed. (numbers, letters, spaces and _) td: 1-64 characters te: 5 characters, 9 characters, 11 characters tf: 2 characters, 5 characters tg: 1-14 characters th: 20 characters, 25 characters, 29
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 83
    ESC/P Command Reference (4) [Backslash]: End of barcode Barcode Type POSTNET, UPC/EAN EXTENTION, CODE39, ITF(I-2/5), EAN-8, EAN-13, UPC-A, UPC-E, CODABAR, GS1 Databar , MSI/Plessey, Intelligent Mail Barcode CODE93, CODE128, GS1-128 (UCC/EAN-128) Command ESC i ［Parameter］ B or b ［Barcode data］ \
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 84
    4 [1-byte decimal] 0 [1-byte decimal] 1 High-density level: L 7％ Standard level: M 15％ (default value) High-reliability level: Q 25％ Ultra-high-reliability level: H 30％ (*2) Auto input (default value) Manual input Selects whether numbers, English alphanumeric characters, kanji characters or
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 85
    ESC/P Command Reference (*1) With Micro QR, the Structured Append setting is invalid, and the default setting is used. (*2) With Micro QR, error correction level 4 is invalid, and the default setting is used. (*3) Some barcode readers cannot recognize a barcode with the cell size specified as 1 dot
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 86
    01h 03h 03h 31h 02h 00h (The parity for the character string "123456789" is 31h.) "123" \\\ "456" \\\ "789" \\\ (2) [Barcode data]: Barcode data When manual input is selected in 8 (data input method), the barcode data must be preceded with one of the following single-byte alphanumeric characters
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 87
    Reference ESC i P QR Code version ASCII: ESC i P n Hexadecimal: 1B 69 50 n Parameters 0≤n≤40 Description  The barcode size can be fixed.  The default value is 0 (auto).  The available versions differ depending on the symbol type used. If a setting other than those listed is specified, the
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 88
    ) [1-byte decimal] 0 [1-byte decimal] 3-90 *0 and 4-44 with MicroPDF417 Specifies the level. (The default value is 0.) Specifies the percentage. (The default value is 10.) Auto setting (default value) Manual settings Auto setting (default value) Manual settings - 82 - 5. Control Command Details
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 89
    decimal point cannot be entered, a value multiplied by 100 is entered. The default value is 50. (The actual value is 0.5.) Note * Some barcode the symbol size (X direction) or symbol size (Y direction) has been specified manually, the aspect value setting is ignored. * If a setting for the symbol
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 90
    ESC/P Command Reference [With symbol type MicroPDF417] Maximum of 250 alphanumeric characters, maximum of 366 numbers, maximum of 150 bytes of binary data However, the following table shows the maximum amount of information allowed according to the settings for symbol size (X direction) and
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 91
    ] 8 [1-byte decimal] 10 Specifies the dot size per cell side. Prints 1 dot per cell side. Prints 2 dots per cell side. Prints 3 dots per cell side. (default value) Prints 4 dots per cell side. Prints 5 dots per cell side. Prints 6 dots per cell side. Prints 8 dots per cell side. Prints 10 dots per
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 92
    no. of cells: Same value as vertical size (x) [1-byte decimal] 0 [ECC200 rectangular] (1) When the vertical size is AUTO Horizontal no. of cells: AUTO (default value) [1-byte decimal] 18 [1-byte decimal] 32 (2) When the vertical size is 8 cells Horizontal no. of cells: 18 cells Horizontal no. of
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 93
    ESC/P Command Reference (3) \\\: End of barcode There must be three backslashes to end 2D barcodes. Example For data "12345" with symbol type ECC square at 40 × 40 with a 3-dot cell size, the command will be as shown below. ESC i D 03h 00h 28h(40d) 28h 00h 00h 00h 00h 00h "12345" \\\ - 87 - 5.
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 94
    value) Full EEC Structured carrier message 2. Structured Append setting [1-byte decimal] 0 [1-byte decimal] 1 With Structured Append (default value) Without Structured Append (2) \ (backslash) Separator between parameters and barcode data (3) [Barcode data]: Barcode data The number of barcode
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 95
    > When "\," is not used three times, the data is written as shown in the following example. \,\, Service class=default value Country code Postal code If a value other than those listed is entered for a parameter, that parameter is specified with
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 96
    value is 23） 4. Symbol size [Full range] [1-byte decimal] 0 [1-byte decimal] 4-32 Auto setting (default value) Manual settings [Compact] [1-byte decimal] 0 [1-byte decimal] 1-4 Auto setting (default value) Manual settings Note: Symbol size is fixed as AUTO when Symbol type is specified as AUTO
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 97
    ESC/P Command Reference (2) [Barcode data]: Barcode data The maximum number of barcode data characters that can be entered is listed below. 3067 alphanumeric characters, 3832 numbers, 1914 bytes of binary data Note The number of characters shown above is only for the Full-Range mode and varies
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 98
    ESC/P Command Reference ESC i G Specify font ASCII: ESC i G Hexadecimal: 1B 69 47 00h n1 data 00 n1 data Parameters 1≤n1≤16 Description  Specify font n1: Data: Specify the length of character string of specified font name. Character string of font name. Example For specifying "HelOb.FNT".
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 99
    ESC/P Command Reference ESC i F P Print downloaded data ASCII: ESC i F Hexadecimal: 1B 69 46 P n 50 n Parameters n: Minus 1 from the key number assigned when transport the data. 0≤n≤254 Description  Print a transferred image on a current print position.  If there is no image data, this
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 100
    ESC/P Command Reference  As with text, if the image data does not all fit on the current line, an automatic line feed is performed, and the data is placed at the beginning of the next line. At that time, the any data that does not fit in the print area is deleted. Abcdefg Abcdefg Abcdefg 1. The
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 101
    ESC/P Command Reference  If the result of pasting in the downloaded image extends beyond the bottom margin position, the image is pasted in after a page feed. At that time, the any data that does not fit in the print area is deleted. Abcdefg WLMBGOr Dabfdifpdzra BGHJgmfg gfdslrt Abcdefg WLMBGOr
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 102
    ESC/P Command Reference  An image data used by "ESC i F P" has to be registered into a printer first. Use P-touch Transfer Manager for transferring the BMP file to a printer for image data registration. A maximum size of memory is different from each model. Please refer to Appendix B:
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 103
    Print mode 07h or 37h ('7'): EPL emulation mode 08h or 38h ('8'): DPL emulation mode FFh: Switch to the initial mode (power-on default) Description  Switches the command execution mode.  Dynamically switches between the five modes.  Since this is a dynamic command, after the printer is turned
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 104
    32 bytes.  The printer does not return status during the printing operation. Offset Name 0 Print head mark Value/Standard Fixed at 80h 1 Size 2 Brother code 3 Series code Fixed at 20h Fixed at "B" (42h) Refer to table (6) below. 4 Model code 5 Country code 6 Power status 7 Reserved 8 Error
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 105
    ESC/P Command Reference (1) Error information 1 Flag Mask Bit 0 01h Bit 1 02h Bit 2 04h Bit 3 08h Bit 4 10h Bit 5 20h Bit 6 40h Bit 7 80h Meaning Not used "End of media" error/"Out of paper" error Not used Battery weak/"Charge needed" error Not used Printer turned off Not used
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 106
    Not connected Not connected Not connected Connected Connected Connected Connected Connected Connected Undefined AC adapter (TD-4XXX) Value 37h AC adapter in use Meaning (RJ-3XXX, RJ-2XXX, TD-2XXX) Value 00h Full battery 01h Half battery 02h Low battery 03h Charging required 04h
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 107
    RJ-4230B RJ-4250WB RJ-3230B RJ-3250WB RJ-2030 RJ-2050 RJ-2140 RJ-2150 TD-4410D TD-4420DN TD-4510D TD-4520DN TD-4550DNWB TD-4210D TD-2020 TD-2120N TD-2130N "C"(43h) "D"(44h) "E" (45h) "F" (46h) "6" (36h) "7" (37h) "8" (38h) "9" (39h) "7"(37h) "8"(38h) "9"(39h) "A"(41h) "B"(42h) "C" (43h) "3" (33h
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 108
    .  Using this command clears all text.  Before entering text, specify the paper orientation with this command.  The setting specified by "ESC iXL2"(default landscape setting) is valid for the landscape orientation when the printer is turned on. ABC ABC - 102 - 5. Control Command Details
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 109
    after printing. n=1 or 49 ("1"): Specifies cutting. n=0 or 48 ("0"): Cancels cutting.  This command is applied to only a printer with auto cutter.  The default auto cut setting can be changed with the P-touch Template Settings Tool (P-touch Template Settings.exe).  The number of auto cut copies
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 110
    i Hexadecimal: 1B 69 X Q 2 01h 00h n1 58 51 32 01 00 n1 Parameters 00h≤n1≤04h Description  Selects the default character style. n1=00h: None (normal characters) (*Manufacturer's default) n1=01h: Bold n1=02h: Outline n1=03h: Shadow n1=04h: Shadow and outline  This command is a static command
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 111
    2 01h 00h n1 58 6B 32 01 00 n1 Parameters 00h≤n1≤05h, 08h≤n1≤0Bh Description  Selects the default font. n1=00h: Gothic (bitmap) n1=01h: Letter Gothic Bold (bitmap) (*Manufacturer's default) n1=02h: Brussels (bitmap) n1=03h: Helsinki (bitmap) n1=04h: San Diego (bitmap) n1=05h Brougham (bitmap) n1
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 112
    font ASCII: ESC i X k Hexadecimal: 1B 69 58 6B 1 00h 00h 31 00 00 Parameters None Description  The default font setting is returned as 3-byte data. [1] 01h (Fixed) [2] 00h (Fixed) [3] Setting 00h: Gothic (bitmap) 01h: Letter Gothic Bold (bitmap) 02h: Brussels (bitmap) 03h: Helsinki (
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 113
    : ESC i X X 2 02h 00h n1 n2 Hexadecimal: 1B 69 58 58 32 02 00 n1 n2 Parameters 00h≤n1≤FFh, 00h≤n2≤01h Description  Specifies the default character size. n1+(n2*256): Default character size (dots)  The following settings (dots) are valid. The maximum valid setting is n=400. *The manufacturer
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 114
    00h n1 n2 33 32 02 00 n1 n2 Parameters 00h≤n1≤FFh, 00h≤n2≤02h Description  Specifies the default line feed. n1+(n2*256): Default line feed (dots) *The manufacturer's default is 32.  Specified length is from 0 to 2 inches.  This command is a static command. Remarks  Invalid if the setting is
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 115
    i X Hexadecimal: 1B 69 58 A 2 41 32 01h 00h n1 01 00 n1 Parameters 00h≤n1≤02h Description  Selects the default alignment. n1=00h: Left alignment (*Manufacturer's default) n1=01h: Center alignment n1=02h: Right alignment  This command is a static command. Remarks  Invalid if n1 is a value
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 116
    page length setting is returned as 4-byte data. [1] 02h (Fixed) [2] 00h (Fixed) [3, 4] n1 n2 settings n1+(n2*256): Default page length (dots) *A default page length of 0 indicates the Auto setting.  The retrieved value is a value specified by a static command. - 110 - 5. Control Command Details
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 117
    1B 69 58 L 2 4C 32 01h 00h n1 01 00 n1 Parameters 00h≤n1≤01h Description  Selects the default landscape orientation setting. n1=00h: Cancel landscape orientation (*Manufacturer's default) n1=01h: Apply landscape orientation  This command is a static command. Remarks  Invalid if n1 is a value
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 118
    i X Hexadecimal: 1B 69 58 j 2 01h 00h n1 6A 32 01 00 n1 Parameters 00h≤n1≤0Dh, 40h Description  Selects the default international character set. n1=00h: U.S.A. (*Manufacturer's default) n1=01h: France n1=02h: Germany n1=03h: U.K. n1=04h: Denmark I n1=05h: Sweden n1=06h: Italy n1=07h: Spain
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 119
    international character set ASCII: ESC i X Hexadecimal: 1B 69 58 j 1 00h 00h 6A 31 00 00 Parameters None Description  The default international character set setting is returned as 3-byte data. [1] 01h (Fixed) [2] 00h (Fixed) [3] Setting 00h: U.S.A. 01h: France 02h: Germany 03h: U.K. 04h
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 120
    ≤n1≤04h Description  Selects the default character code set. n1=00h: Standard character code set (*Manufacturer's default) n1=01h: Eastern European character m 1 00h 00h 6D 31 00 00 Parameters None Description  The default character code set setting is returned as 3-byte data. [1] 01h (Fixed
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 121
    : Disable recovery print n1=01h: Enable recovery print  This command is a static command.  Manufacturer's default: 00h Disable recovery print: TD-2XXX 01h Enable recovery print: RJ-4XXX, RJ-3XXX, RJ-2XXX, TD-4XXX Remarks  Invalid if n1 is a value outside of the allowable range ESC iXd1 Retrieve
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 122
    32 03 00 00 Parameters n1: 00h, 01h Description  Select the recovery print count. n1=00h: Recovery count: 1 n1=01h: Recovery count: Unlimited  The default value is 00h (1).  This command is a static command. 0Ch n1 0C n1 Command example  For specifying the recovery print count to unlimited
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 123
    ESC/P Command Reference ESC iXv1 (0Ch) Retrieve recovery count ASCII: ESC i X v Hexadecimal: 1B 69 58 76 1 03h 00h 00h 0Ch 00h 31 03 00 00 0C 00 Parameters None Description  Retrieve a recovery count setting value.  3 bytes of data are returned from the main unit. [1]: 01h （Fixed） [2]: 00h
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 124
    01 00 n1 Parameters 00h≤n1≤01h Description  Select an existence of barcode margin. n1=00h: No margin n1=01h: Add margin (*Manufacturer's default)  This command is a static command. Remarks  Invalid if n1 is a value outside of the allowable range ESC iXE1 Retrieve barcode margin setting ASCII
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 125
    00h 00h 00h n1 03 00 00 00 n1 Parameters 00h≤n1≤FFh Description  Select a line print enable/disable setting. n1=00h: Enable line print (default) n1=01h~FFh: Disable line print  This command is a static command.  This command is available only with continuous length tape. ESC iX_1 (00h
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 126
    01h n1 03 00 00 01 n1 Parameters 00h≤n1≤FFh Description  Set a time for print start after receiving line feed command.. n1=00h: 1000msec (default) n1=01h~FFh: Specified value X 100msec  This command only works when line print is enabled.  This command is a static command. ESC iX_1 (01h
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 127
    ESC/P Command Reference ESC i DC1 SQ(01h) Specify self-printing QR code content ASCII: ESC i Hexadecimal: 1B 69 DC1 S 11 53 Q 01h n1 51 01 n1 n2 data n2 data Parameters 00h≦n1≦5Ah n2: 00h Description  Set the QR code content included in self-printing. n1: length of the content set in the
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 128
    ESC/P Command Reference ESC i DC1 SR(01h) Select setting change lock ASCII: ESC i Hexadecimal: 1B 69 DC1 S 11 53 Q 01h n1 52 01 n1 n2 n3 n2 n3 Parameters n1: 01h n2: 00h n3: 00h or FFh Description  Prohibit changing settings and rewriting transfer data. n3=00h: Cancel the prohibition of
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 129
    A: Supported Printers RJ-4XXX RJ-3XXX Series RJ-2XXX TD-4XXX TD-2XXX RJ-4230B RJ-4250WB RJ-3230B RJ-3250WB RJ-2030 RJ-2050 RJ-2140 RJ-2150 TD-4410D TD-4420DN TD-4510D TD-4520DN TD-4550DNWB TD-4210D TD-2020 TD-2120N TD-2130N Model ESC/P Command Reference - 123 - Appendix A: Supported
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 130
    400 dots) Printing Character style None, Italic, Bold, Double-strike Text Underline Supported Character width Horizontal alignment Rotate Pica pitch, Elite pitch, Micron pitch Left, - Settings that appear in bold and underlined are the default settings. - 124 - Appendix B: Specifications
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 131
    400 dots) Printing Character style None, Italic, Bold, Double-strike Text Underline Supported Character width Horizontal alignment Rotate Pica pitch, Elite pitch, Micron pitch Left, Settings that appear in bold and underlined are the default settings. - 125 - Appendix B: Specifications
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 132
    400 dots) Printing Character style None, Italic, Bold, Double-strike Text Underline Supported Character width Horizontal alignment Rotate Pica pitch, Elite pitch, Micron pitch Left, - Settings that appear in bold and underlined are the default settings. - 126 - Appendix B: Specifications
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 133
    method Maximum print length TD-4410D TD-4420D N TD-4210D TD-4510D TD-4520D N 4550DNW Italic, Bold, Double-strike Text Underline Supported Character width Horizontal alignment Pica pitch, that appear in bold and underlined are the default settings. USB RS-232C USB RS-232C Ethernet
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 134
    CPCL Page Print emulation CPCL Line Print emulation TD-2130N Maximum print length 1 m Resolution (dpi None, Italic, Bold, Double-strike Text Underline Supported Character width Horizontal alignment Rotate Pica pitch, Elite pitch the default settings. - 128 - Appendix B: Specifications
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 135
    ESC/P Command Reference Appendix C: Character Code Tables Character code tables (1) Windows1252 (Western Europe) 0 1 2 3 4 5 6 7 8 9ABCDEF 0 SP 0 @ P ` p € ° ÀÐà ð 1 ! 1AQa q 2 " 2BRb r 3 # 3CS c s 4 $ 4DT d t 5 %5 EU e u 6 & 6 F V f v 7 ' 7 GWg w 8 ( 8HX h x 9
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 136
    ESC/P Command Reference (2) Windows1250 (Eastern Europe) 0 1 2 3 4 5 6 7 8 9ABCDEF 0 SP 0 @ P ` p € tˇ 1 ! 1AQa q 2 " 2BRb r 3 # 3 C S c s ˇ L " Ł ł Ă Ó ă ó 4 $ 4DT d t 5 %5 EU e u 6 & 6 F V f v 7 ' 7 GWg w 8 ( 8HXh x ľ 9 ) 9 I Y i y A * : J Z j
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 137
    ESC/P Command Reference (3) Brother standard 0 1 2 3 4 5 6 7 8 9ABCDEF 0 SP 0 @ P ` p α 1 ! 1 AQa q β ± 2 " 2 B R b r 3 # 3CS c s ¾ 4 $ 4DT d t 5 %5EUe u à òÑ ┼ § 6 & 6 F V f v å û a ¯ µ ÷ 7 ' 7 GWg w ç ù o ¯ 8 ( 8HX h x ° 9 ) 9 I Y i y · A * : J
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 138
    ESC/P Command Reference (4) Japanese character code set 0 1 2 3 4 5 6 7 8 9ABCDEF 0 SP 0 @ P ` p ┴ SP 1 ! 1AQaQ 2 " 2BRbR 3 # 3CS c S 4 $ 4DT d T 5 %5EUe u 6 &6FV f v 7 ' 7 GWg w 8 ( 8HXh x 〒 9 )9IYi y 市 A * : JZ j z 区 B + ;K[ k
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 139
    ESC/P Command Reference International character set table Corresponding characters that switch in each language when the international character set is changed n 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E 0 United States (U.S.A 1 France 2 Germany 3 Britain (U.K.) 4 Denmark I
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 140
    ESC/P Command Reference Appendix D: Introducing the Brother Developer Center Useful information for developers, such as applications, tools, SDKs as well as FAQs, are provided in the Brother Developer Center. https://support.brother.com/g/s/es/dev/en/index.html?navi=offall - 134 - Appendix D:
  • Brother International TD-4520DN | ESC/ P Command Reference - Page 141
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
Software Developer's Manual
ESC/P Command Reference
RJ-4230B/4250WB
RJ-3230B/3250WB
RJ-2030/2050/2140/2150
TD-4410D/4420DN/4510D/4520DN/4550DNWB/4210D
TD-2020/2120N/2130N
Version 3.02