Brother International ULT-2002D Users Manual - English - Page 17

CONTENTS I Feed Dog Position Switch 1 I Presser Foot Dial 1 3 2 I Knee Lifter 20° 6 Use this switch when attaching buttons (see page 3-61) or for other similar projects. Remove the flat bed attachment and raise the presser foot lever to operate the feed dog position switch. Set the lever in the position for normal sewing 1 Feed dog position switch 1 - 2 - ..... The feed dogs are up and will help guide the fabric. ..... The feed dogs are down and will not help guide the fabric. 3 - Turn the presser foot dial in order to adjust the pressure applied by the presser foot. The higher the number, the stronger the pressure will be. The presser foot dial has settings from 1 (weakest) to 4 (strongest). Use setting "3" for normal sewing. Lower the presser foot lever before turning the presser foot dial. If you adjust the setting, be sure to return it to "3" after sewing. 1 Weak 2 Strong 4 - 5 - You can use the knee lifter to raise and lower the presser 6 - foot without using your hands, so it is convenient for quilting and other similar projects. To attach, angle the knee lifter about 20 degrees to the left and insert it into the mounting slot as far as possible. 7 - CAUTION If the knee lifter is not pushed into the mounting slot as far as possible, it may come out during use. 8 - Use your knee to move the knee lifter to the right in order to raise the presser foot. Release to the left for the presser foot to lower. CAUTION Be sure to keep your knee away from the knee lifter during sewing. If the machine is operated while the knee lifter is pushed, the needle may break or the thread tension may loosen. 9 - ?! Index 1-6 Setting Up