Brother International XL-3510 Owner's Manual (Español) - Spanish - Page 21
Lower Threading for models, equipped with a quick-set bobbin
View all Brother International XL-3510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Hold the end of the thread, push the bobbin 4 down with your finger, and then pass the thread through the slit, as shown. Lower Threading (for models equipped with a quick-set bobbin) This feature is only available on certain models. 1 CAUTION ● Winding the bobbin improperly may cause the thread tension to loosen, breaking the needle and resulting in injury. Reattach the bobbin cover. Put the left tab in 5 place (see arrow 1), and then press lightly on the right side (see arrow 2) until the cover clicks into place. 2 1 • Replace the cover so that the end of the thread comes out from the left side of the cover (as shown by the line in the illustration). 1 2 1 Wound evenly 2 Wound poorly ● The bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the enclosed bobbin or bobbins of the same type (part code: SA156, SFB (XA5539-151)). Actual size 11.5 mm (7/16 inch) This model Other models CAUTION ● Be sure to turn off the power. If you accidentally step on the foot controller and the machine begins to operate, injury could result. 19