Brother International XL 5130 Users Manual - English - Page 55
Buttonhole Fine Adjustment, driver in the - direction. If the left side is too fine - how to use
View all Brother International XL 5130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
CONTENTS KNOWING YOUR SEWING MACHINE STRAIGHT AND ZIGZAG STITCHING BUILT-IN STITCHES 1 2 4 3 10 432 - SS 5 432 - SS 10 5 432 - SS 10 7 6 8 Buttonhole Fine Adjustment If the stitching on the two sides of the buttonhole do not appear identical, the following adjustments can be made. 1. Set the Stitch Length Dial to " " and sew the buttonhole on a scrap of fabric while observing how the material is fed. 2. If the right side of the buttonhole is too coarse or fine, adjust the feeding of the material with the Stitch Length Dial. 1 Right side 2 Stitch length 3 Shorter 4 Longer 5 In this case 3. After obtaining a satisfactory feeding on the right side, stitch the buttonhole and observe the feeding. 4. If the left side is too coarse or fine compared to the right side, adjust the buttonhole fine adjustment screw as described below. If the left side is too coarse, turn the screw with the enclosed screwdriver in the - direction. If the left side is too fine, turn the screw with the enclosed screwdriver in the + direction. This adjustment allows both sides of the buttonhole to appear identical. 6 Stitch length dial 7 Buttonhole fine adjustment screw 8 Left side 9 In this case 9 9 BUTTONHOLE AND BUTTON SEWING USING ATTACHMENTS AND APPLICATIONS MAINTENANCE INDEX 47