Brother International XR1300 Users Manual - English - Page 96
once or twice to raise the needle.
View all Brother International XR1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
APPENDIX Raise the presser foot using the presser foot d lever. Pass the thread under the thread guide cover g from the back to the front. Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide cover with your left hand. a Presser foot lever • If the presser foot is not raised, the sewing machine cannot be threaded correctly. Raise the needle by turning the handwheel e toward you (counterclockwise) so that the mark on the wheel points up, or press (needle position button) (for models equipped with the needle position button) once or twice to raise the needle. a Thread guide cover Feed the upper thread as shown in the h illustration below. or a Mark b Needle position button Pull some thread off the spool, and then pass f the thread under the thread guide. a Thread guide 94