Brother International XR6060 Users Manual - English - Page 25
If the spool or the spool cap is not positioned
View all Brother International XR6060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
As shown, press down on the spool pin lever d with your finger. X The spool pin swings up. Fully insert the spool for the upper thread f onto the spool pin. Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom. 1 CAUTION ● Do not grab the bar to raise the spool pin, otherwise, the spool pin may bend or break. Remove the spool cap. e Slide the spool cap onto the spool pin. g With the slightly rounded side of the spool cap positioned toward the left, slide the spool cap onto the spool pin as far as possible to the right so that the spool is moved to the right end of the spool pin. a Spool pin b Spool cap CAUTION ● Be sure to raise the spool pin before use. If the spool of thread is in the wrong place, or is set incorrectly, the thread may tangle on the spool pin and cause the needle to break. CAUTION ● If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin or the needle may break. ● Three spool cap sizes are available, allowing you to choose a spool cap that best fits the size of spool being used. If the spool cap is too small for the spool being used, the thread may catch on the slit in the spool or the needle may break. 23