Brother International XS2100 Operation Manual - Page 97
Symptom 3, The needle breaks, or the needle, bends and thus hits the needle, plate., Symptom 4,
![]() |
View all Brother International XS2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Remove the upper thread and bobbin. c • Refer to "Fabric is caught in the machine and cannot be removed" (page 90). Remove the bobbin case. d • Refer to "Fabric is caught in the machine and cannot be removed" (page 90). If threads remain in the bobbin case, remove e it. • Refer to "Fabric is caught in the machine and cannot be removed" (page 90). Symptom 4 : The fabric is not fed. ■ Cause The thread has become clogged as the stitch is too fine. ■ Remedy Lengthen the stitch length. • Refer to "Adjusting the stitch length and width" (page 40). Insert the bobbin case so that the mark on f the bobbin case aligns with the mark on the machine. • Refer to "Cleaning the race" (page 82). Attach the needle plate cover. g • Refer to "Cleaning the race" (page 82). Set the bobbin in the bobbin case. 4 h • Refer to "Cleaning the race" (page 82). If the needle is bent, replace it with a new i one. • Refer to "Replacing the needle" (page 32). Turn on the machine, and then press the j needle position button to raise the needle. • Refer to "Upper threading" (page 25). Thread the machine correctly. k • For details on threading the machine, refer to "Upper threading" (page 25). Symptom 3 : The needle breaks, or the needle bends and thus hits the needle plate. ■ Cause You have not used the right combination of fabric, thread and needle. ■ Remedy Choose a thread and needle that are appropriate for the type of fabric. • Refer to "Needle types and their uses" (page 31). 95
![](/manual_guide/products/brother-international-xs2070-operation-manual-3e4561b/97.png)