Browning BAR Owners Manual - Page 15
Trigger, Group, Reassembly
View all Browning BAR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
5 Perform any cleaning of the parts and receiver cavity as necessary. DO NOT DISASSEMBLE THE TRIGGER GROUP BEYOND THIS POINT. FIGURE 6 TRIGGER GROUP R E A S S E M B LY 1 Before reinstalling the trigger group, make sure that the breech bolt is fully forward and engaged in the locked position. FIGURE 7 Push trigger guard pins entirely through receiver. 2. Visually check the safety on the trigger guard to make certain it is still in the ON SAFE position. FIGURE 8 Remove trigger assembly. 3 Insert the trigger group back into the receiver, lining up the holes in the trigger assembly with the holes on each side of the receiver. Re-insert trigger guard pins. 4 Re-insert the trigger guard pins from either side of the receiver and gently tap them into place again using caution not to scratch the receiver. (See Figure 8.) 14