Bushnell Imageview Spotting Scope Owner's Manual - Page 10
prevent degrading the image quality. Clean the lenses only with camera lens cleaning tissue or - imageview digital camera spotting scope
View all Bushnell Imageview Spotting Scope manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
TAKING STILL PHOTOS button on the remote to take a photo). The display will "freeze" briefly immediately after a photo is takenthis is normal while the image is being stored in the internal or card memory. 5. The "remaining photos" counter in the lower right corner of the display will drop by one number after each photo (or two, depending on your subject and settings) is taken. Once it reaches "00", and the display indicates "MEMORY FULL" when SNAP is pressed, you are out of memory (storage space) and will need to download the photos you have taken so they can be deleted to make room in the memory for new photos, or you may remove the filled up card and install another SD card if you are on a trip away from your computer. 6. A digital zoom feature is available. Press the Up arrow key to zoom in (you will see the result on the LCD, and the digital zoom indicator increases in 0.1x increments up to 4.0x ). Press the Down arrow key to zoom back out (the zoom indicator decrements down). To turn off all digital zoom (go back to the 22x optical magnification only) keep pressing the Down key until the zoom indicator goes back down all the way to "1.0x" and disappears. 7. To review a photo after you take it, press the OK/PLAY button. To see previous photos, press the Down arrow key-each press takes you back one photo, and pressing the Up arrow key moves forward to more recent photos. Press the OK/PLAY button again to return to the live preview. See the section "The Play Menu-Options and Settings" for directions covering deleting photos, formatting internal or card memory, and protecting important photos. NOTE: Use care during handling to avoid touching the exposed lenses of the ImageView spotting scope to prevent degrading the image quality. Clean the lenses only with camera lens cleaning tissue or microfiber cloth, after removing loose dust or dirt with a blower brush or "canned air". Camera lens cleaning fluid may be used if necessary (lightly moisten the lens tissue, do not apply directly to the lens), avoid the use of other liquids of any type. 10