Bushnell Stableview 10x35 Owner's Manual - Page 10
Battery Installation
View all Bushnell Stableview 10x35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
BATTERY INSTALLATION 1)Slide the battery compartment release switch on the handstrap to the Open position to release the battery holder. 2)Insert two new size AA alkaline batteries. 3)Attach the battery holder to the handstrap and slide the release switch to the locked position to secure the compartment. WARNING • NEVER slide the stabilization lever to the ACTIVE position if you do not have two batteries installed. Damage could result. • Use the same type of batteries. Do NOT mix old and new batteries. Doing so can cause leakage or rupture. • When changing the batteries outdoors, be sure not to let any water get into the battery compartment. • If you plan to leave the binoculars stored for a prolonged period, remove the batteries in order to prevent natural discharge and/or leakage. When the batteries are removed, keep the battery holder attached to the handstrap to protect the internal contact points. • Keep the contact points away from any metal. Damage could result. 4 SPECIFICATIONS Magnification Objective Lens Diameter Compensation Angle (stabilization correction) Eye Relief Field of View Minimum Focusing Distance Exit Pupil Interpupillary Adjustment Distance Dimensions: LxWxH Weight Battery Safe Ambient Temperature Range 10x 35mm 3 12mm 260ft. at 1000yds/86.6m at 1000m 12ft. 3..5mm 53 to 74 mm 7.25 x 6 x 3.5 inches (without strap) 43.9oz/1244g (2) Size AA alkaline batteries (not included) -10 C to 50 C (14 F to 122 F) Specifications and designs are subject to change without notice.