Campbell Scientific CC5MPX CC5MPX and CC5MPXWD Digital Network Cameras - Page 18
Getting Started, IP Address Configuration
![]() |
View all Campbell Scientific CC5MPX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Section 3. Getting Started You should record the existing settings that are used on the computer to restore the connection back once the CC5MPX setup is completed. In the screen shown above, the computer is set to Obtain the IP address automatically which is quite common. At this point you will also want to disconnect your computer from the network and connect it directly to the CC5MPX camera. You do not need to use a crossover cable as the CC5MPX has an auto MDIX feature that will allow the camera to automatically connect with or without a crossover cable. Change the settings by assigning a manual IP address. In this case, we will assign an address of 192.168.1.91 with a Subnet mask of 255.255.255.0. The default gateway could also be set to 192.168.1.1. FIGURE 3-4. IP Address Configuration Click OK. 3-4
![](/manual_guide/products/campbell-scientific-cc5mpx-cc5mpx-cc5mpxwd-digital-network-cameras-151a50d/18.png)