Campbell Scientific CR200X PakBus NetWorking Guide - Page 16
Edlog Dataloggers (CR510-PB, CR10X-PB and CR23X-PB), 4.3.1 PakBus Settings - manual
View all Campbell Scientific CR200X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
PakBus Networking Guide Once connected to the datalogger with the Device Configuration Utility, the PakBus address of the datalogger can be set on the Deployment tab. Other radio settings can be changed on this screen, but there are no other PakBus settings that can be changed using Device Configuration Utility. 4.3 Edlog Dataloggers (CR510-PB, CR10X-PB and CR23X-PB) A PakBus operating system is available for the CR510, CR10X and CR23X dataloggers. The operating system can be sent to the datalogger with the Device Configuration Utility. 4.3.1 PakBus Settings PakBus settings can be entered in the datalogger using the Device Configuration Utility. Alternatively, the user can enter PakBus settings in the datalogger program using the Options | PakBus Settings menu item in Edlog. Sending the program to the datalogger will configure those PakBus settings and override any settings already in the datalogger but the preferred method of entering PakBus settings is with the Device Configuration Utility. In addition, PakBus settings can be manually configured or viewed in the CR510-PB, CR10X-PB or CR23X-PB datalogger with a keyboard display. Use *D15 and *D18 for configuration and *D17 and *D19 to view the routing table of the datalogger. 12