Campbell Scientific CS135 CS135 Lidar Ceilometer - Page 21
Wiring Using Supplied Campbell Scientific Cables
View all Campbell Scientific CS135 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
User Guide Mains Connector Pin 1 2 3 4 Table 4.1 Function of the connector pins Function Live Not connected Neutral Earth Colour of supplied cable cores Brown NA Blue Green/yellow Blower/Heater Connector Pin 1 2 3 4 5 6 E Function Neutral Fan + Therm Therm (0V) Switched 230/115 AC Live Fan on Earth Colour of supplied cable cores Black (1) Black (2) Black (3) Black (4) Black (5) Black (6) Green/yellow Communications Connector Pin Colour of 9-PIN `D' supplied Connector cable (fig 4.4) cores 1 Red 8 2 Yellow 7 3 Green 5 4 Black 5 White 2 6 Blue 3 E Screen RS232 CTS* RTS* Gnd Tx Rx RS485 Half duplex Y Gnd Z RS485 Full duplex/ RS422 Y/Tx non-inverting B/Rx non-inverting Gnd Z/Tx inverting A/Rx non-inverting *If hardware handshaking is not used pins 7 and 8 should be connected together. 4.5.2 Wiring Using Supplied Campbell Scientific Cables Two cables are supplied, each 10m long. One is for the mains power supply, the other is for communications. WARNING If the power cable is incorrectly wired then irrevocable damage can be done to the unit and there is risk of serious injury or death. 13