Canon 0057B001 ZR Instruction Manual - Page 11
Protecting tapes from accidental erasure, Handling cassettes, Cassette Memory
![]() |
UPC - 013803047691
View all Canon 0057B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Protecting tapes from accidental erasure E REC SAVE REC SAVE Mastering the Basics To protect your recording from accidental erasure, slide the tab on the cassette so that it exposes the hole. (This switch position is usually labeled SAVE or ERASE OFF). If you load this cassette and put the camera in record pause mode (p. 13), "THE TAPE IS SET FOR ERASURE PREVENTION" is displayed for approx. 4 seconds and then the v mark flashes in the display. If you want to record on the cassette again, slide the tab back so the hole is closed, and the red mark covered. Handling cassettes • To protect the tape heads, transfer cassettes directly from the tape case to the camcorder - do not open the tape protect cover or touch the tape itself. • Do not use cassettes where the tape has been damaged or rejoined - they may damage the camcorder. • Do not insert anything into the small holes on the cassette or cover them with cellophane tape. • Handle cassettes with care - dropping them or exposing them to external shocks may cause internal damage. • Store cassettes in the provided case, rewinding them to the start of the tape first, and then storing them upright. • A cassette with metal plated terminals may become dirty with use, affecting information transfer. Therefore, after using a tape around ten times, be sure to clean the terminals with a cotton wool bud. Cassette Memory You are unable to use the cassette memory function with this camcorder. 12
![](/manual_guide/products/canon-3543b001aa-zr-instruction-manual-9070bfb/11.png)