Canon 0206b003 EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 93
Bulb Exposures
UPC - 013803049626
View all Canon 0206b003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Bulb Exposures When bulb is set, the shutter stays open while you hold down the shutter button fully, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures. 1 Set the Mode Dial to . 2 Set the shutter speed to "buLb." ¡ Look at the LCD panel and turn the dial to select "buLb." ¡ The next setting after "30"" is "buLb." Aperture 3 Set the desired aperture value. ¡ Hold down the button and turn the dial. 4 Take the picture. ¡ Press the shutter button completely. s The elapsed exposure time will be displayed on the LCD panel. (Displays 1 sec. to 999 sec.) ¡ The exposure continues as long as you hold down the shutter button. Elapsed exposure time (sec.) Since bulb exposures will have more noise than usual, the image will look grainy. ¡ Bulb exposures may result in grainy images due to picture noise.You can reduce noise by setting C.Fn-2 [Long exposure noise reduction] to [1: On] (p.148). ¡ For bulb exposures, using Remote Switch RS-60E3 (optional) is recommended. ¡ Remote Controller RC-1/RC-5 (optional) can also be used for bulb exposures. When you press the transmit button, the exposure will start 2 sec. later. To stop the exposure, press the button again. 93