Canon 0206b003 EOS DIGITAL Software Instruction Manual Windows - Page 42
Sets the continuous shooting speed, Limits the number of shots during continuous shooting
UPC - 013803049626
View all Canon 0206b003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
P.Fn-17 Disables automatic AF point selection O When you select beyond the peripheral AF point, the selection stops there. It makes selecting a peripheral AF point faster. O If C.Fn-11-2 has been set, you can switch to automatic AF point selection by pressing the < > button during autofocusing. ( "Selecting the AF Point" in the camera's Instruction Manual) O If automatic AF point selection has been preset at [AF frame registration] setting, the preset setting remains valid. ( "Registering and Switching the AF Point" in the camera's Instruction Manual) P.Fn-18 Enables automatic AF point selection when C.Fn-11-2 has been set O Enables the standard horizonal AF point selection together with automatic AF point selection with C.Fn-11-2. O Convenient when you want to use automatic AF point selection while C.Fn-11-2 has been set. If P.Fn-17 [Disables automatic AF point selection] has also been set, P.Fn-17 will override P.Fn-18 to disable automatic AF point selection. P.Fn-19 Sets the continuous shooting speed O In the list box, select the speed of continuous shots during continuous shooting. O By reducing the maximum continuous shooting speed, AI Servo AF continuous shooting can be more stable. O With the EOS-1Ds Mark II and EOS-1Ds, only [Continuous Shooting] is displayed. In AI Servo AF, it may not be possible to complete the selected speed of continuous shots. P.Fn-20 Limits the number of shots during continuous shooting O This enables you to enter the maximum number of shots to be exposed during continuous shooting while the shutter button is pressed fully. O Convenient when you do not want to shoot an unwanted scene that follows. P.Fn-21 Enables quiet operation when the shutter button is OFF after picture-taking O When single shooting is selected, this function selects quiet camera operation when you release the shutter button from the fully pressed position to the half way position. O This is useful when the camera operation noise would be disturbing after you take the picture. If you select continuous shooting, the camera operates normally. Setting mirror lockup with C.Fn-12 will further reduce the shooting noise. P.Fn-23 Changes the timer's time length O After you press and release a button, the respective function remains active for a specific number of seconds. You can change this number of seconds as necessary. O The function's activation time can be set from 0 to 3600 sec. (1 hour). O If the standard activation time is too short or too long, you can adjust it. 6 sec. Timer 16 sec. Timer Post-shutter release timer O AE lock time after you press the shutter button halfway or the < > button. O FE lock time after you press the < > button. O Exposure setting retaining time after the picture is taken. Setting this to a longer time can make it easier to shoot in the same exposure with AE lock. O LCD panel illumination time after the picture is taken. Note that if you set a longer activation time, the battery become exhausted more quickly and the number of possible shots will be reduced. To turn off the function's activation time midway, press the < button or < > button. > button, < > P.Fn-24 Illuminates the LCD panel during bulb exposures O After the bulb exposure starts, press the button to illuminate the LCD panel until the bulb exposure ends. O Convenient when you want to monitor the elapsed bulb exposure time. Note that if you take bulb shots for long periods, the battery becomes exhausted more quickly and the number of possible shots will be reduced. Cover/Table of Contents Introduction 1 Downloading Images from the Camera, and Camera Settings 2 Working with Images in the ZoomBrowser EX 3 Remote Shooting in the EOS Capture 4 Setting the EOS 5D and EOS-1D Series Cameras 5 Troubleshooting and Uninstalling the Software Index 4-7