Canon 0275B001 ELURA90/ELURA85/ELURA80 Instruction Manual - Page 67
Select [D.E.SELECT] and set it to [MULTI-S].
UPC - 013803050363
View all Canon 0275B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY 1. Open the menu and select [D.EFFECT SETUP]. 2. Select [D.E.SELECT] and set it to [MULTI-S]. E 3. Select [M.S.SPEED] and select the transition speed. Following transition speeds can be selected: fast (every 4 frames), moderate (every 6 frames*), slow (every 8 frames*). * In Low Light mode: moderate (every 8 frames), slow (every 12 frames). 4. Select [M.S.SPLIT], select the number of sequences and close the menu. "MULTI-S" flashes. 5. Press the D.EFFECTS button. • MANUAL: Images will be captured each time you press the D.EFFECTS button. The blue frame indicating the next sequence disappears after the last image. Pressing the D.EFFECTS button for more than 1 second cancels the images one after another. • FAST, MODERATE, SLOW: The set number of images will be captured at the set speed. To cancel the multi-image screen, press the D.EFFECTS button. 6. Press the start/stop button to begin recording. The multi-image screen is recorded on the tape. Turn off the digital effect when you do not use it. The camcorder retains the setting even if you turn it off or change the program AE mode. The image quality may be slightly lower with digital effects. Digital effects cannot be used in the following cases: - When the program selector is set to EASY. - During DV dubbing. Faders cannot be used when Card Mix is activated. About the multi-image screen: The multi-image screen cannot be used in the following cases: - In the night modes. - When the widescreen mode is selected. - When Card Mix is activated. In PLAY (VCR) mode: Pressing any tape operation button (such as play or pause), or performing date search cancels the multi-image screen. Advanced Functions Recording 67