Canon 0296B002 EOS Utility for Windows Instruction Manual (for EOS DIGITAL cam - Page 38
Illuminates the LCD panel during bulb exposures, Sets the default settings when the < CLEAR >
UPC - 013803056853
View all Canon 0296B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
P.Fn-20 Limits the number of shots during continuous shooting O This enables you to enter the maximum number of shots to be exposed during continuous shooting while the shutter button is pressed fully. O Convenient when you do not want to shoot an unwanted scene that follows. P.Fn-21 Enables quiet operation when the shutter button is OFF after picture-taking O When single shooting is selected, this function selects quiet camera operation when you release the shutter button from the fully pressed position to the half way position. O This is useful when the camera operation noise would be disturbing after you take the picture. If you select continuous shooting, the camera operates normally. Setting mirror lockup with C.Fn-12 will further reduce the shooting noise. P.Fn-23 Changes the timer's time length O After you press and release a button, the respective function remains active for a specific number of seconds. You can change this number of seconds as necessary. O The function's activation time can be set from 0 to 3600 sec. (1 hour). O If the standard activation time is too short or too long, you can adjust it. 6 sec. timer 16 sec. timer Post-shutter release timer (2 sec. timer) O AE lock time after you press the shutter button halfway or the < > button. O FE lock time after you press the < > button. O Exposure setting retaining time after the picture is taken. Setting this to a longer time can make it easier to shoot in the same exposure with AE lock. O LCD panel illumination time after the picture is taken. Note that if you set a longer activation time, the battery become exhausted more quickly and the number of possible shots will be reduced. To turn off the function's activation time midway, press the < > button, < > button or < > button. P.Fn-24 Illuminates the LCD panel during bulb exposures O After the bulb exposure starts, press the < LCD panel illumination > button to illuminate the LCD panel until the bulb exposure ends. O Convenient when you want to monitor the elapsed bulb exposure time. Note that if you take bulb shots for long periods, the battery becomes exhausted more quickly and the number of possible shots will be reduced. P.Fn-25 Sets the default settings when the < CLEAR > button is ON O You can use this function to select the default settings when you press the < CLEAR > button. O Convenient when you want to instantly switch to frequently-used settings. P.Fn-26 Shortened release time lag 1D Mk II N 1Ds Mk II 1D Mk II O Normally, the shutter-release time lag is controlled for stability. This Personal Function eliminates this control. As a result, the shutterrelease time lag can be reduced by as much as about 20 percent when the aperture needs to be stopped down by no more than 3 stops. O This is effective when a shorter shutter-release time lag is more important than a stable shutter-release time lag. Since the difference is in 10-millisecond increments, the time lag may not feel any shorter. Introduction Contents at a Glance 1 Downloading Images 2Camera Settings 3Remote Shooting 4 Preferences Reference Index 37