Canon 0967B001 XL H1 Instruction Manual - Page 83
Color Matrix [CMX] only in CAMERA mode
View all Canon 0967B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Master Pedestal [PED] (only in CAMERA mode) Adjust the master pedestal level in the range -9 to +9. E Setup Level [SET] (only in CAMERA mode) Adjust the setup level in the range -9 to +9. • Depending on the value set for the master pedestal [PED], the setup level may not be able to take a negative value. In that case, adjusting the setup value within a certain value range will have no effect. Sharpness [SHP] Adjust the sharpness level in the range -9 to +9. Horizontal Detail Frequency [HDF] You can select from [HIGH], [MIDDLE] or [LOW]. Horizontal/Vertical Detail Balance [DHV] Adjust the horizontal/vertical detail balance in the range -9 (only horizontal) to +9 (only vertical). Coring [COR] Adjust the detail noise level in the range -9 to +9. Noise Reduction 1 [NR1] (only in CAMERA mode) You can select from [OFF], [HIGH], [MIDDLE] or [LOW]. • With the [HIGH] setting moving subjects may leave a trailing afterimage. • When picture noise is already low due to the gain settings, the noise reduction function may not be noticeable. Noise Reduction 2 [NR2] (only in CAMERA mode) Results in an effect similar to applying the skin detail function over the whole picture. You can select from [OFF], [HIGH], [MIDDLE] or [LOW]. • Unlike with the NR1 setting, a trailing afterimage will not appear. Color Matrix [CMX] (only in CAMERA mode) You can select from [NORMAL], [CINE1] or [CINE2]. Color Gain [CGN] Adjust the color saturation level in the range -9 to +9. 83 Recording