Canon 10 X 32 IS 10x32 IS 12x32 IS 14x32 IS Instructions - Page 11

Using the Image Stabilizer (2) Holding down the button zzStarting and stopping Image Stabilizer operation • The general IS will operate while holding down the Image Stabilizer button (1). Similarly, the POWERD IS will operate while holding down the POWERD IS button (2). • IS operation will stop once you let go of the button. zzSwitching between general IS and POWERD IS • When continuing to hold the Image Stabilizer button during general IS operation, press and hold the POWERD IS button and let go of the Image Stabilizer button to switch to POWERD IS operation (1, 2). • When continuing to hold the POWERD IS button during POWERD IS operation, press and hold the Image Stabilizer button and let go of the POWERD IS button to switch to general IS operation (2, 1). • IS operation will stop once you let go of all buttons. zzThe Image Stabilizer may not be able to compensate when the user's body is being deeply shaken, subjected to vibration, or when the user's hands are shaking too much. zzIf the binoculars face down for more than 10 seconds, such as when they are hanging from the strap, the Image Stabilizer will turn off to conserve power. To use the binoculars in a downward direction, keep pressing the Image Stabilizer button or the POWERD IS button. zzEven without batteries loaded, the binoculars can still be used as is. ENG-10