Canon 10 x 20 IS 8x20 IS 10x20 IS Instructions - Page 11
Using the Image Stabilizer
View all Canon 10 x 20 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Using the Image Stabilizer When you look through the binoculars, the image may be shaking and difficult to see since your hands are holding the binoculars. In such a case, the Image Stabilizer can help steady the image. The Image Stabilizer can be operated using the following methods. Five-minute operation and stopping operation • Press the Image Stabilizer button and quickly let it go, and the Image Stabilizer will operate continuously for five minutes. • To stop the Image Stabilizer, press and release the Image Stabilizer button again. Starting and stopping Image Stabilizer operation while holding down the button • The Image Stabilizer will operate while holding down the Image Stabilizer button. • The Image Stabilizer will stop once you let go of the button. zzWhen the Image Stabilizer button is operating, the lamp turns on. zzIf the lamp does not turn on, replace the batteries with new ones. zzThe Image Stabilizer may not be able to compensate when the user's body is being deeply shaken, subjected to vibration, or when the user's hands are shaking too much. zzThe Image Stabilizer will stop once the batteries run out. zzEven without batteries loaded, the binoculars can still be used as is. ENG-10