Canon 12 X 32 IS 10x32 IS 12x32 IS 14x32 IS Instructions - Page 8
Loading the Batteries - test
View all Canon 12 X 32 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Loading the Batteries 1 Open the cover. zzOpen the battery chamber cover. 2 Insert the battery. zzLoad the two batteries in the correct + and - orientation as shown in the illustration on the battery chamber cover. Once the batteries have been placed inside, firmly close the battery chamber cover. 3 Check that the lamp lights. zzPress the Image Stabilizer button or POWERD IS button and check that the lamp lights (please continue to hold the button for more than one second). zzWhen handling batteries, please carefully read " Warning (regarding the batteries)" and " Caution (regarding the batteries)" which are found on page 3-4 of this manual. zzDo not load the batteries backwards. Doing so may bend the spring electrodes, causing damage. zzBe careful not to let moisture onto the inner side of the battery chamber cover or into the chamber. If there is moisture, make sure to remove it and adequately dry it off before changing batteries. Battery Life (Continuous Use) (Based on Canon's testing conditions) Size-AA alkaline batteries* 23°C / 73°F Approx. 10 hours -10°C / 14°F Approx. 2 hours * Alkaline battery usage times can vary greatly depending on the brand. AA-size nickel metal hydride batteries (Ni-MH) can also be used. ENG-7