Canon 2050C Easy Start Guide - Page 1
Canon 2050C - DR - Document Scanner Manual
UPC - 013803051407
View all Canon 2050C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Document Scanner DR-2050C/SP Easy Start Guide Thank you for purchasing the Canon DR-2050C/DR-2050SP Document Scanner. This Easy Start Guide describes the procedure for setting up the scanner for use. Follow the procedures outlined in this Easy Start Guide to set up the scanner. Details on using the scanner are described in the User's Guides packaged with the scanner. Before you use the scanner, make sure to thoroughly read the User's Guides. Checking the Accessories When you unpack your scanner, make sure that it contains all of the following accessories. If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative. 3. Open the front cover at (1) and (2), and remove the orange tape fastening the roller cover. 4. Open the roller cover. Installing the Software Install the software before connecting the scanner to the computer. Warning ❏ Before installing the software, make sure your computer is correctly running one of the following versions of Windows. For details, refer to the DR-2050C/DR-2050SP User's Guide. • Windows 98SE • Windows Me • Windows 2000 Professional SP4 or later • Windows XP Home Edition SP2 or later • Windows XP Professional SP2 or later ❏ Do not connect the scanner to the computer before installing the software. If you connect the scanner and turn it ON before you install the software, a wizard screen will appear. If this wizard appears, click [Cancel] to exit the wizard, and then turn the scanner OFF. DR-2050C/DR-2050SP Feed Roller USB Cable Type A/Type B AC Adapter/Power Cord (Length: 6 ft. (1.8 m)) (Connected length: 8 ft. 6 in. (2.6 m)) Document Guide Adapter Easy Start Guide DR-2050C/DR-2050SP (this document) User's Guide Adjustment Sheet DR-2050C Setup Disc 0880281099-L5T1P7-BR01 CANON CANADA INC. 6390 DIXIE RD MISSISSAUGA ON L5T 9Z9 Adobe Acrobat Warranty Card Registration Card Setup Disc (U.S.A. and Canada only) (U.S.A. and Canada only) *For the DR-2050SP, the following accessories are included in addition to the above items. DR-2050SP User's Guide Presentation Mode Edition Remote Control AAA Batteries (2) RGB Cable Mini D-sub 15 Pin × 2 (Length: 5 ft. (1.5 m)) Note ● To use the feed roller, install it on the scanner. ☞ [STEP 2] "Removing the Packing Materials and Installing the Feed Roller" ● Documents can be prevented from feeding slantwise by installing the document guide adapters on the document guides. (☞ STEP 5) ● The adjustment sheet is used to adjust the scanner when anomalies begin to appear in scanned images. Store it in a safe place where it will not be lost. ● The DR-2050 Setup Disc contains the "DR-2050C Scanner Driver", "CapturePerfect 3.0", and "OmniPage SE" made by Nuance Communications Inc. ☞ DR-2050C/DR-2050SP User's Guide p.17 "About the Setup Disc" ● Items included in this package are subject to change without notice. ● You must keep the machine's packaging and packing materials for storing or transporting the machine. After checking the package contents, you need to prepare the scanner for use. (☞ STEP 2) Removing the Packing Materials and Installing the Feed Roller Remove the scanner from the box, remove the orange tape and protective sheets from the scanner, and install the feed roller on the scanner body. 1. Peel off the four pieces of orange tape from the outer casing. 5. Lower the roller lock lever (1), and slide it towards the left (2). 6. Load the feed roller, align the notch on the roller with the shaft on the scanner body. 7. Slide the roller lock lever towards the right, fit the lever feed roller into the hole on the left of the roller (1), and push down the roller lock lever to lock the feed roller shaft (2). 8. Close the roller cover. Make sure that the roller cover clicks into place. 9. Gently push in the front unit on its left and right sides to close the front unit. Make sure that the front unit clicks into place. 10. Close the document feed tray and top cover. Document Feed Tray Top Cover Wizard Screen (Windows 2000) ❏ Be sure to log on with administrator privileges when logging on to Windows. ❏ Close all other applications before installing the software. 1. Turn ON your computer. 2. Insert the DR-2050C Setup Disc into the PC's CD-ROM drive. The setup wizard automatically starts up when you insert the CD-ROM into the CDROM drive. If the setup wizard does not start up, execute setup.exe in the CD-ROM. 3. Click [Typical Installation]. If you click [Typical Installation], all of the software is installed. If you want to select which parts of the software to install, click [Custom Installation]. 4. Click [Install]. All of the currently displayed software is installed. To install only selected software, click [Back] and select [Custom Installation]. 5. Click [Next]. 6. Read the software license agreement, and click [Yes] if you consent to the conditions of the software. Installation of the scanner driver starts. 2. Open the document feed tray and remove the protective sheet. PUB. CE-IE-546 ©2007 CANON ELECTRONICS INC. The scanner is now ready for use. Next, you need to install the scanner software. (☞ STEP 3) ■ Trademarks • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • Microsoft Windows® is a registered trademark of Microsoft USA in the United States and other countries. • Other brands and product names used in this manual may be trademarks or registered trademarks of their respective companies. During scanner driver installation, the scanner driver and the Job Registration Tool are installed. 7. Click [Finish] to complete the installation. Next, the installation wizard for CapturePerfect 3.0 appears. 8. Click [Next]. 9. Read the software license agreement, and click [Yes] if you consent to the conditions of the software. 10. Check the destination folder and click [Next]. Installation of CapturePerfect 3.0 starts. 11. Click [Finish] to complete the installation of CapturePerfect 3.0. 12. Next, installation of OmniPage SE starts. Follow the messages on the screen to proceed with the installation. 13. When all installations are complete, the Installation completed screen appears. Click [Exit] to exit the installer. (Click [Back] to return to the menu screen.) 14. Remove the setup disc, and finish the software installation. Note ● When software is installed the icons are added to the Program menu. (Windows 2000) This completes the software installation. Next, you need to connect the scanner to your computer. (☞ STEP 4) ☞ Continued on back side