Canon 220P Operating Guide - Page 83
received at the destination, displayed for an e-mail message
UPC - 013803085167
View all Canon 220P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Documents are double fed Cause Solution Static electricity is causing the pages of the document to stick to each other. Before you load a stack of documents, fan the documents. Documents are double fed Cause Solution The type of paper of the documents is causing a paper feed error. Load no more than ten pages of documents. (See p. 2-10.) Use bypass feeding to scan the pages one by one. A stack of documents are fed together Cause Solution The feed selection lever is set to bypass feeding. (See p. 2-5.) Set the feed selection lever to page separation feeding. Cannot connect to an FTP server that can be accessed from outside the company Cause Solution The scanner cannot connect to an FTP server that requires firewall settings to be configured. Use an FTP server that does not require firewall settings to be configured. Scanning starts immediately after I press a job button (certain users only) Cause Solution The job buttons are designed to work that way. (See p. 4-14.) Place the document and then press a job button. Cannot turn on the power Cause The AC adapter is not connected properly or the power plug is not inserted. Check the connections of the AC adapter and power plug. If the 5 Solution problem is not resolved after checking the connections, contact your local authorized Canon dealer. Troubleshooting The wrong send time is displayed for an e-mail message received at the destination Cause Solution (1) The date and time settings are incorrect. (2) The time zone is set to a different country. Contact the administrator, and check the "Language/Timezone" setting. The sender's address is not displayed at the destination of an e-mail message Cause Solution The e-mail addresses of the user and administrator have not been registered. Contact the administrator, and register the e-mail addresses. Cannot connect to the network (IP address conflict problem) Cause Solution The IP address that was set is already being used by another device. Contact the system administrator of the network, and change the IP address setting. Cannot connect to the network (LAN cable connection problem) Cause Solution The LAN cable is not connected properly. Check the connections of the LAN cable. 5-3