Canon 2262A006 Instruction Manual - Page 9
Turn on the Power Switch
View all Canon 2262A006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Turn on the Power Switch 1 Turn on the power switch. Set the power switch to . The flash will then start recycling. X The lamp will light. 2 Check that the flash is ready. When the flash is ready, the lamp will light. To fire a test flash, press the test firing button (pilot lamp). About Auto Power Off To save battery power, the power will turn off automatically after 90 sec. of idle use. To turn on the Speedlite again, press the camera's shutter button halfway. A test flash cannot be fired while the camera's operation timer 4 or 0 is active. 8
8
1
Turn on the power switch.
Set the power switch to <
K
>. The
flash will then start recycling.
The <
a
> lamp will light.
2
Check that the flash is ready.
When the flash is ready, the
<
J
> lamp will light.
To fire a test flash, press the test firing
button (pilot lamp).
To save battery power, the power will turn off automatically after 90 sec.
of idle use. To turn on the Speedlite again, press the camera’s shutter
button halfway.
Turn on the Power Switch
About Auto Power Off
A test flash cannot be fired while the camera’s operation timer
4
or
0
is
active.