Canon 2764B003 EOS 5D Mark II Instruction Manual - Page 31
Attaching and Detaching a Lens
UPC - 543142622896
View all Canon 2764B003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Attaching and Detaching a Lens Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrow. 2 Attach the lens. Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place. 3 On the lens, set the focus mode switch to (autofocus). If it is set to (manual focus), autofocus will not operate. 4 Remove the front lens cap. Do not look at the sun directly through any lens. Doing so may cause loss of vision. The camera cannot be used with EF-S lenses. Minimizing Dust When changing lenses, do it in a place with minimal dust. When storing the camera without a lens attached, be sure to attach the body cap to the camera. Remove dust on the body cap before attaching it. 31