Canon 2MC Elura 2 and Elura 2MC Instruction Manual - Page 108
Press the D.EFFECT ON/OFF button.
UPC - 013803606294
View all Canon 2MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
5_ELURA2_E(93-115) 7/25/00 17:25 Page 108 5. Press the CARD +/- buttons to select the still image to be E combined. • Your currently recording image is combined with the pre-recorded still image. 6. Select MIX TYPE. • CARD CHROMA, CARD LUMI., CAM. CHROMA settings appear. 7. Select the desired setting. 8. Select MIX LEVEL. 9. Adjust the mix level. • Turning the SELECT dial upwards adjusts to the left and turning downwards adjusts to the right. 10.Close the menu. • The name of your selection flashes in the display. On/Off 11.Press the D.EFFECT ON/OFF button. • The name of your selection stops flashing. • Each time you press the ON/OFF button, your selection is activated (display lights continuously) or deactivated (display flashes). For a moving image 1. Press the start/stop button to start and stop recording. • The combined images are recorded onto the cassette. For a still image 1. Press the PHOTO button halfway down and hold it. • F flashes white in the display as the camcorder adjusts the focus and it is displayed continuously as a green mark when the camera is ready to take the image. 2. Press the PHOTO button fully down to record the image to the cassette. • F disappears from the display. • The combined images are recorded onto the cassette for approximately 6 seconds. Using the MultiMediaCard (ELURA2 MC only) 108 • You cannot use Card Mix in the Low Light recording program (in MOVIE and P.SCAN modes). • If you change the position of the POWER dial or move the program selector from Q to [ Easy Recording mode, select your still image for Card Mix again. • When setting Card Mix, you must carry out steps 1 to 5.