Canon 3288B002 REALiS WUX10 User Manual

Canon 3288B002 Manual

Get Canon 3288B002 PDF manuals and user guides View all Canon 3288B002 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon 3288B002 manual content summary:

  • Canon 3288B002 | REALiS WUX10 User Manual - Page 1
    MULTIMEDIA PROJECTOR User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index ENG
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 2
    Features of WUX10 Multimedia Projector Thank you for purchasing a Canon projector. The WUX10 Multimedia Projector (hereinafter referred to as "the projector") is a high-performance projector that is capable of projecting a high-resolution computer screen and high-quality digital image on a large
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 3
    Projector User's Manual (this document) This is a User's Manual for the WUX10 Multimedia Projector. This manual provides detailed information on how to use the projector. Read this manual thoroughly to make the most of your projector and ensure safety. Important Information and Quick Start Guide
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 4
    by Connecting the Power Cord (P93) Disabling the Beep During the Operation (P93) Disabling Buttons (P94) Hiding Guide Messages (P95) Turning Off the Projector LED Lamps (P96) Setting a Password (P97) Producing a Presentation Blackened Out an Image Temporarily (P64) Freezing the Picture (P64
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 5
    Table of Contents Table of Contents Features of WUX10 Multimedia Projector 2 Quick Reference Guide 4 Safety Instructions ...10 Safety Precautions...11 ■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE 12 AC Power Cord Requirement 14 Federal Communication Commission Notice 15 Canadian Radio
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 6
    Auto focusing ...52 ■ Manual focusing...52 Adjusting Keystone Distortion 53 ■ Auto adjustment ...53 ■ Manual adjustment...53 ■ Resetting the ...61 ■ How to Select an Image Mode 61 Turning Off the Projector 62 Useful Functions Available During a Presentation 63 Useful Functions Available During
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 7
    Progressive Processing 79 Selecting a Menu Position ...80 Correcting the Screen Color ...80 Reversing projection ...81 Capturing a Logo ...82 Selecting the User Logo Display Position 82 No Signal Screen...83 Screen When Blank ...83 Selecting a Logo at Startup ...84 Selecting Aspect Ratio of Screen
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 8
    the Projector Operation 94 Setting up the Remote Control Channel 94 Selecting a Display Language 95 Showing/hiding the Guide Screen 95 Error Notification Message 113 ■ Projector Control ...114 Appendix ...115 Troubleshooting...116 WARNING Lamp Flash Patterns 116 Symptoms and Solutions
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 9
    from Image Software 127 Supported Computer Signal Types 128 Relationship between Screen Size and Projecting Distance 129 Glossary ...130 Specifications ...134 ■ Projector ...134 ■ Remote Control...134 ■ External View ...135 ■ ANALOG PC-2/COMPONENT IN terminal 135 ■ Service Port (CONTROL 136
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 10
    , or other accidents. If your projector is not operating correctly, read this manual again, check operations and cable connections, and try the solutions shown in the "Troubleshooting" section at the end of this booklet. If the problem still persists, contact the service center or the dealer where
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 11
    Instructions Safety Instructions Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. • This projector projects intense light slot on the projector. Heat build-up can reduce the service life of your projector, and can also
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 12
    the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the projector. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector. For added protection of the projector during a lightning storm, or when it is left unattended or unused for long
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 13
    service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 14
    Instructions AC Power Cord Requirement The AC Power Cord supplied with this projector EQUIPMENT AND EASILY ACCESSIBLE. NOTE FOR CUSTOMERS IN THE US LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway,
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 15
    Instructions Safety Instructions Federal Communication Commission Notice Multimedia Projector, Model: WUX10 off and on, the user is encouraged to try instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 16
    Instructions Precautions on Handling the Batteries in the Remote Warning projector. Ask the Canon service representative to clean and check the inside of the projector and replace the lamp. Caution If the projector indicates that the lamp should be replaced (i.e., the LAMP REPLACE indicator lights
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 17
    Safety Instructions Safety Instructions Disposal of Waste Lamp • Dispose of the projector's mercury lamp according to local regulations just Caution like the fluorescent lamps. Carrying/Transporting the Projector Caution • This projector is a precision machine. Do not subject the projector to
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 18
    to move or topple, resulting in an injury. Position the projector in a horizontal position. • Install the projector correctly. Incorrect installation may cause troubles and acci- dents. 20° • Do not tilt the projector more than 20 degrees above and below the horizontal. 20° • When you
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 19
    Before Use Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 19
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 20
    are supplied with the projector. z Remote control z Batteries (type AAA, two) z Computer connection cable for remote control (DVI/Mini at the bottom of the projector. • When the projector is not in use, attach the lens cap to protect the lens. z User's Manual (CD-ROM) z Warranty card z
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 21
    from dust or scratches, and is not designed to protect the projector from external shocks. z User's Manual (CD-ROM) z Important Infomation and Quick Start Guide Before Use Cables Remote control • Wait until the cooling fan stops before putting the projector in the carrying bag. Do not put the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 22
    or cap deformation. Ranging window Do not place any obstacle between the projector and the screen, as the auto focusing function may fail to operate (P33) Lens cap (P20) Power cord connector (P42) Lens Infrared remote receiver (P28) Anti-theft lock hole An anti-theft wire cable available
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 23
    to do so will result in fire hazards or malfunctions. Air intake vent Lamp cover (P124) Air filter (P122) Screw holes for installation of ceiling or RSCL09) when appropriate. Contact the dealer where you purchased the projector for more detailed information. • Make sure to use the optional
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 24
    can be operated using buttons on the remote control or the top control on the main unit. The remote control allows you to operate all functions of the projector. POWER button (P42, P62) Turns the projector on or off. ASPECT button (P60) Toggles between the modes for aspect ratio. FOCUS button
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 25
    ) Toggles between display/non-display of image. P-TIMER button (P67) Displays the time elapsed since this button was pressed. MUTE button (P65) Mutes the sound. LAMP button (P91) Switches the lamp mode between Standard and Silent. 25
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 26
    the volume. [>]: Increases the volume. Selects the upper, lower, left or right item in the menu. WARNING lamp (P116) Flashes red when a problem has been detected on the projector. AUTO SET button (P46) Performs input signal settings, auto adjustment on focusing, keystone distortion, screen color
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 27
    audio signal corresponding to the projected image signal. (6) VIDEO IN Terminal (P39) Receives a composite video signal from AV equipment. (7) Service port (CONTROL) Exclusively used by the service personnel (it is not used normally). (8) LAN port (P104) Connects a LAN cable. Used to connect the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 28
    control may be inoperative if there is an obstacle between the remote control and main unit or the infrared remote receiver on the main unit is exposed to direct sunlight or strong light of lighting equipment. • When you use two projectors at the same time, you can change the channel settings to
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 29
    Projecting an Image Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 29
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 30
    Steps for Setting Up the Projector and Projecting an Image Connecting the Projector to Equipment (P34) Turning on the Power (P42) Do you want to project an image from a notebook computer? Yes No For a notebook computer, turn on
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 31
    ■Placing in Front of the Screen Place the projector in front of the screen. • Be sure to place the projector parallel to the screen to ensure distortion-free projections. • The screen must not be exposed to direct sunlight or light from lighting equipment. In a bright room, it is recommended to
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 32
    ■Placing on a Level Place Be sure to keep the projector as horizontal as possible. If you need to point the projector up (for example, when the screen is placed on a higher position), follow the instruction given in "When Pointing the Projector Up" on the following page. • Adjust the tilt of
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 33
    image can be corrected with the auto keystone (P45) or by using the keystone distortion adjust function (P53). 1 Lift the front side of the projector and push the adjusting foot lock button to extend the adjustable foot. 2 Raise the image to the desired height angle, then release the button to
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 34
    Connecting the Projector Connectable Equipment and Input Terminals DIGITAL PC ANALOG AV equipment. DVI-I IN terminal can be used to connect only computer. AV equipment (P40) Service terminal (Reserved) Video AUDIO IN terminal VIDEO IN terminal LAN terminal Audio signal for each image input
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 35
    OUT) Commercial audio cable VGA cable (Input signal type: [ANALOG PC-2] - P47) Computer To ANALOG PC-1/ DVI-I IN To AUDIO IN Projector Monitor output terminal (mini D-sub 15-pin) Audio output terminal (AUDIO OUT) Commercial VGA cable To input a corresponding audio signal: Commercial audio
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 36
    P47) Computer mini D-sub 15-pin - BNC Terminal Convert Cable (commercial item) mini D-sub 15-pin - BNC Terminal Convert Cable (commercial item) Projector To ANALOG PC-2/ COMPONENT IN Monitor output terminal (mini D-sub 15-pin) Commercial BNC cable Audio output terminal (AUDIO OUT) To input
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 37
    ■Outputting Audio to Speakers It is possible to output sound of projected images to amplified speakers. Projector Speaker To AUDIO OUT RCA terminal Commercial audio cable Mini jack Audio input terminal (AUDIO IN) Use an audio cable without a built-in resistor. Using
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 38
    and AV equipment. Before connecting the cables, turn off both the projector and AV equipment. The description provided here is just examples. For more detailed information, refer to the manual for the connecting AV equipment. ■Connecting to Digital Video Output Terminal (digital connection) HDMI
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 39
    ■Connecting to Analog Video Output Terminal (analog connection) Video cable (Input signal type: [VIDEO] - P47) AV equipment Projector RCA terminal Image output terminal Commercial video cable To VIDEO IN To input a corresponding audio signal: RCA terminal Mini jack Audio output terminal
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 40
    a commercial component cable that fits to the terminal type of the AV equipment to connect the supplied component cable. AV equipment Projector Commercial component cable with RCA - RCA plugs RCA Component terminal D terminal Image output terminal To ANALOG PC-2/ COMPONENT IN Supplied component
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 41
    ■Outputting Audio to Speakers It is possible to output sound of projected images to AV equipment or amplified speakers. Projector Speaker To AUDIO OUT RCA terminal Commercial audio cable Mini jack Audio input terminal (AUDIO IN) Use an audio cable without a built-in resistor. Using
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 42
    off the projector. It may shorten the lamp life if you turn on the projector immediately after turning it off. • To save power, unplug the power cord when not in use. 3 Remove the lens cap and press the POWER button. The POWER indicator flushes green, and then lights in green. Remote control Top
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 43
    Mode (power management) When you enable the power management mode, the lamp is automatically turned off if the projector receives no signal input for a certain period of time. (P92) SET buttons to make focus adjustment. Remote control Top control An item highlighted in orange will be selected. 43
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 44
    The function keys you use and the method used to turn on the external monitor output vary depending on the model. For details, see the instructions of your notebook computer. 44
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 45
    was completed. • You changed the position or angle of the projector during the projection process. • The auto screen color correction is distortion and/or screen color correction have not been performed properly, manually adjust them. (Adjusting the focus: P52, Correcting keystone distortion:
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 46
    Setting Up the Screen Automatically ■Performing the Auto Setup Press the AUTO SET button to perform the auto setup. Remote control Top control • After the auto setup is complete, the following window appears. Press the OK button. 46
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 47
    the input signal since the last projection. ■Types of Input Signals The table below shows the relationship among input signals supported by the projector, input terminals and connection cables. Input signal HDMI Input terminal HDMI IN Types of connection cables HDMI cable (commercial item
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 48
    (INPUT) ■Selecting an Input Signal 1 Press the INPUT button to pop up a window shown at the lower right. Remote control Top control The currently active input signal is marked with a circle and highlighted in orange. An input signal that is ready for projection is displayed in white. When no
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 49
    to "1920 x 1200 pixels" or a resolution closest to the output signal resolution of the computer based on the performance of the projector (resolution: 1920 x 1200 pixels). (P128) ■Windows Vista 1 Open the [Control Panel] from the start menu, then select [Appearance and Personalization] - [Adjust
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 50
    . ■Performing the Auto PC Function Press the AUTO PC button to make projector adjustment. Remote control Top control Perform the following if the project image has not been pixels] to make adjustments. (P75 - P78) • For the signal types supported by the projector, see the table on page 128. 50
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 51
    button to adjust the size of the projecting image. Change the projector installation position if your desired image is too large or too small window shown at the lower right. Remote control Top control 2 Press the pointer buttons to adjust the image size. Remote control Top control < [ ] /
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 52
    is beyond the range of 1.2 m (3.9') to 9.1 m (29.6'). Move the projector installation position if such is the case. (P31) ■Auto focusing Press the function will be disabled. ■Manual focusing 1 Press the FOCUS button to pop up a window shown at the lower right. Remote control Top control 2 Press
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 53
    keystone distortion is too large to adjust, move the projector installation position. (P31) • The amount of Manual adjustment 1 Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right. Remote control Top control 2 Press the pointer buttons to adjust the focus. Remote
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 54
    Adjusting Image 3 When the keystone distortion has been adjusted, press the OK button. ■Resetting the Keystone Adjustment Perform the following steps to reset the keystone adjustment. Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window. On the window, select [OK] with [
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 55
    steps to select the aspect ratio of the projecting image. 1 Press the MENU button to display a menu window. Remote control Top control 2 Use [] to select the [Display settings] tab. Remote control Top control < 3 Select [Screen aspect] with [ ] / [ ], and then press the OK button
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 56
    Selecting Screen Aspect and Aspect < < 4 Use [ ] / [ ] to select a screen aspect type. Remote control Top control 16:10 Select this when you use a screen with aspect ratio of 16:10. Also, select this when you project an image
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 57
    button when [16:9 D. image shift] is selected for [Screen aspect] to pop up a window at the lower right. Remote control Top control < < 2 Use [ ] / [ ] to move the image. Remote control Top control [ ]: Moves up the image. [ ]: Moves down the image. 3 When the image shift adjustment has
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 58
    /KEYSTONE button when [4:3 D. image shift] is selected for [Screen aspect] to pop up a window at the lower right. Remote control Top control 2 Use [] to move the image. Remote control Top control []: Move the image to the right. 3 When the image shift
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 59
    Projecting an Image Selecting Screen Aspect and Aspect Selecting Aspect Ratio Select the aspect ratio of projecting image based on the input signal type, aspect ratio of the screen and resolution. For more details on the aspect ratios, refer to "When Projecting an Image from a Computer" on page 125
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 60
    aspect ratios by pressing the ASPECT button. For more details on the aspect ratios, refer to "When Projecting an Image from a Computer" on page 125. Remote control You can also select any aspect ratio from the menu. (P73) Some aspect ratios may not appear depending on types of input signals. 60
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 61
    adjust the brightness, contrast, sharpness, gamma, color adjustment, advanced adjustment, and lamp mode. (P85) ■Image modes Standard Select this to project an image with Press the IMAGE button on the remote control to select your desired image mode. The selection is toggled among aspect types
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 62
    pop up a window shown at the lower right. Remote control Top control Press the POWER button again while the confirmation message is displayed. The lamp goes off, the [POWER] indicator starts flashing in red and the cooling fan starts. • You cannot turn the projector on while the cooling fan is in
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 63
    Table of Contents Safety Instructions Useful Functions Available During a Presentation Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 63
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 64
    the proceedings of the presentation. • You want to stop a moving image. Remote control Press the image. Press the image. button to blacken out the button The projector shows the following icon. Press the button again to cancel the FREEZE function. • The (left and right) LED illumination lamps on
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 65
    the Volume Useful Functions Available During a Presentation Muting the Sound Useful when: • You want to adjust the volume level of the projectors or external speaker. Remote control Useful when: • You want to temporality mute the unnecessary sound. • You want to immediately mute the sound
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 66
    on the current subject. Press the button. A part of the image is enlarged each time pressed. Remote control You can move the area to the enlarged by using < < Remote control Projector • The magnification appears on the screen. You can restore the original size of the image by pressing
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 67
    time is displayed at the lower right corner of the screen. • Time is counted up to 59:59. Then the timer returns to 00:00. Remote control Press the timer. button again to stop the • Press the button while the timer is stopped. The timer disappears from the screen. Then press
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 68
    68
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 69
    Setting Functions from Menus Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 69
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 70
    set the type of signal or the method of projection of the images input. [System settings] tab (P92) You can set the operation of the projector. [Image adjustment] tab (P85) You can adjust the image quality and colors as you like. [Information] tab (P101) You can confirm the information about the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 71
    ■Basic Operation of Menu 1 Press the MENU button to display a menu window. Remote control Top control How to Use Menus 2 Use [] to select a tab. Remote control Top control < < • If the tab position is not highlighted in orange, use [ ] / [ ] to move the highlight to the top. 3 Use [
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 72
    the adjustment volume. In a different screen (1) Example: Menu position 1. Press the OK button to display a different screen. 2. The follow the instruction on the screen. In a different screen (2) < < Example: Tracking 1. Press the OK button to display a different screen. 2. Use [ ] / [ ] to
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 73
    to the aspect ratio of image. (P59) • Different contents are displayed for different screen aspects or input signal types. • The ASPECT button on the remote control can also be used to select the Aspect settings. Auto Full 16:9 An image is projected at an aspect ratio of the input signal.
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 74
    to accept your setting and then press the MENU button. Select an input signal corresponding to the resolution of the computer. • For the signal types supported by the projector, see the table on page 128. Press the OK button to accept your setting and then press the MENU button. • [Auto] is the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 75
    button to accept your setting and then press the MENU button. • [Auto] is the factory default. • Refer to the User's Manual of your AV equipment connected to the projector to confirm the component signal type. Use [] to select a value. When you have completed the adjustment, press the MENU
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 76
    Setting Display Status Adjusting Input Signal (ANALOG PC) - Tracking [Input signal settings] - [Tracking] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Adjust Input Signal (ANALOG PC) - Horizontal position [Input signal settings] - [Horizontal position] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 77
    Setting Display Status Adjust Input Signal (ANALOG PC) - Vertical position [Input signal settings] - [Vertical position] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Adjust Input Signal (ANALOG PC) - Horizontal pixels [Input signal settings] - [Horizontal pixels] HDMI DIGITAL PC ANALOG PC
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 78
    • The signal level is select automatically in [Auto] mode. (Some AV equipment may not support this.) • If the HDMI output of your AV equipment allows switching between [Normal] and [ For more detailed information, refer to the User's Manual of your AV equipment connected to the projector. 78
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 79
    Select HDMI Over Scan [HDMI over scan] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Display settings HDMI over scan You can select this as required when you project visual software with the HDMI signals. Setting Display Status Performing Progressive Processing [Progressive] HDMI DIGITAL PC ANALOG
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 80
    desired position with Normal Select this if a standard type of projection screen is used. The images are projected in the light quality similar to that of natural light. Greenboard Select this if a greenboard (in dark green color) is used for the projection screen. The color quality similar to
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 81
    . Ceiling mounted Select this if you project an image with the projector hung from the ceiling. The projected images is inverted in both Rear, Ceiling mounted • To hung the projector from the ceiling, use the optional bracket. Contact your Canon dealer. • The keystone distortion adjustment will be
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 82
    OK Cancel Press the OK button, and the image in the red frame is captured as [User logo]. Cancels the image capturing. • For projecting the captured log on a screen, select [User logo] on the [Projector on], [No signal screen], [Screen when blank]. • You may not capture an image depending on the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 83
    by pressing the BLANK button on the remote control. Black Blue User logo The screen is all black. Displays no user logo. The screen is blue background. Displays no user logo. Displays a user logo. Black Blue User logo The screen is all black. Displays no user logo. The screen is blue background
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 84
    Display settings User screen settings Projector on You can display a specified logo on a screen from the moment the projector is turned on after turning on the projec- tor. Canon logo Displays the Canon logo captured at the factory. User logo Displays a user logo captured on the [Logo capture]
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 85
    the projecting image. You can select it also with the IMAGE button on the remote control. (P61) Press the OK button to accept your setting and then press ], [Sharpness], [Gamma], [Color adjustment], [Advanced adjustment] and [Lamp mode]. • The adjustment you have made is stored as each combination
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 86
    Setting the Image Quality Adjusting the Brightness [Brightness] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Brightness You can adjust the brightness of images. Adjusting the Contrast [Contrast] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Contrast You can adjust
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 87
    Adjusting the Sharpness [Sharpness] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Sharpness You can adjust the sharpness of images. Setting the Image Quality Making a Gamma Correction [Gamma] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Gamma You can correct the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 88
    The adjustment you have made is stored as an adjusted value of input signals being projected in an image mode. • Adjusting a color makes mark shown in [Color adjustment] in the menu. Color level Adjusts the intensity of each color. [>] Increases the intensity of color. [
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 89
    Dynamic gamma You can adjust the gradation representation of light and dark portions of an image automatically. Off Disables value of input signals being projected in an image mode. • Making this setting makes mark shown in [Advanced adjustment] in the menu. Off Dynamic gamma is disabled. Weak
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 90
    Setting the Image Quality Making Advanced Adjustment (Auto fleshtone) [Advanced adjustment] - [Auto fleshtone] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Advanced adjustment Auto fleshtone You can represent the skin color impressively. Adjusting Fine Color Adjustment (6-axis
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 91
    brightness reduces power consumption and cooling fan noise. You can enable or disable this mode also with the LAMP button on the remote control. Image adjustment Reset You can reset the current image settings to the default settings. OK Cancel Resets the image settings. Cancels resetting of the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 92
    the Power Management Mode [Power management mode] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings Power management mode You can turn off the lamp or projector automatically for saving power. Select [On] for the items if you want to enable in auto setup function. Auto focus Enables the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 93
    on the preceding page, to [Standby] or [Exit]. • Wait at least 5 minutes when you power on the projector again after disconnecting it. It may shorten the lamp life if you turn on the projector immediately after turning it off. Off Disables the beep. On Enables the beep. Press the OK button to
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 94
    . Make sure to keep holding down the OK button until a beep sounds. The key lock is unlocked. Ch1 Select the channel of the remote control used for this projector, and press the OK Ch2 button. Press the OK button to accept your setting and then press the MENU button. • The factory defaults
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 95
    Swedish Russian Dutch Finnish Norwegian Turkish Polish Hungarian Czech Danish Arabic Chinese (Simplified) Chinese (Traditional) Korean Japanese Off Hides the guide screen. On Shows the guide screen. Press the OK button to accept your setting and then press the MENU button. • [On] is the factory
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 96
    • You cannot extend the display time for the window indicating the completion of Auto setup (P46), the guide window (P95), the lamp replacement window (preparation) (P123), or the lamp replacement window (warning) (P123). • You cannot use the button holding operation in the keystone adjustment. 96
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 97
    power will be turned off. • The power is also turned off if no password is inputted for 3 minutes. To Cancel the Password Turn off the projector and unplug the power plug. Hold down the MENU button on the top control and connect the power plug. Make sure to keep holding down
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 98
    that indicates the timing to replace the projector when you replace it. Do not reset the lamp counter except when you have replaced the lamp. Otherwise, the lamp counter cannot indicate the correct timing for replacing the lamp. For the details of the lamp replacement, refer to the page 124. Select
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 99
    Over 2,000 hours Displayed in green, yellow and red bar. A message "Replace with the new lamp." appears when power is turned on. Setting Various Function Turning On/Off the Network Function [Other settings] -[Network function] HDMI DIGITAL PC ANALOG PC COMPONENT
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 100
    • Initialized are "IP address" and other items set in "Connecting the Projector to Network" (P103). • You can do this initialization also from a the MENU button. • This function cannot reset the value of [Lamp counter], [Language], [Remote control], [Input signal] and [Network setting] to default.
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 101
    Details of the input signal currently selected "Type of signal", "resolution of signal", "frequency" and other information is shown. Current firmware version Serial number unique to this projector Details of the network settings (P106) [Not set] is shown for an item having no settings. ID of this
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 102
    102
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 103
    Connecting the Projector to Network Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 103
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 104
    Set an IP address by following the steps below. (The examples shown are Windows XP screenshot images.) ■Setting IP Address of the Computer 1 Connect the projector and a computer directly via a cross or straight type LAN cable. Commercial cross or straight type LAN cable 2 Turn on the power of the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 105
    the [OK] but- ton on the [Local Area Connection Properties] window to close it. ■Resetting the IP Address Setting of the Computer 1 Turn off the projector and remove the LAN cable. 2 Follow the step 3 to 6 to restore the network setting to the original setting. 105 Operating the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 106
    key. The password input screen appears. The supported web browsers is Microsoft Internet Explorer 6 or later. 3 In the password input screen, enter "root" for [User name] and "system" for [Password] and click the [OK] button. The projector network configuration screen appears on the web browser
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 107
    The user name for logging in the network [New password]: The new password [Confirm new password]: The password for confirmation 2 Click [TCP/IP], enter appropriate values in the following field, and click the [OK] button. Setting items: [IP address]: The IP address of the projector [Subnet
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 108
    to which the carbon copy of the error report is sent (Within 63 alphanumeric characters, can be omitted) [From:]: The sender of the E-mail (the projector) [SMTP server IP address]: The IP address of the available SMTP mail server [SMTP server port number]: The port number of the available SMTP
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 109
    authentication)], [CRAM-MD5 (SMTP authentication)], [USER/PASS (POP before SMTP)], [APOP (POP before SMTP)] Setting items: [User name]: The user name for the mail authentication [Password]: The SMTP mail server (millisecond, the factory default: 300) Operating the Projector over Network 109
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 110
    The name of the community (user) to which the SNMP trap is sent What is the SNMP Agent Function? This projector supports the SNMP (Simple Network Management was occurred. • lampStatusChange: it tells that the status of the lamp used time was changed. • faultyCoolingFan: it tells that a
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 111
    uses the DES-CBC for the authentication and encryption protocols. 6 Click [Projector name], enter the projector name, and click the [OK] button. The factory default is [WUX10]. Operating the Projector over Network 7 Click [Apply] when you have completed each menu. Click the [OK] button when
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 112
    Setting Network ■Resetting the Network Setting 1 Click [Initialize] in the menu screen. 2 Click the [OK] button when the following dialog box is displayed. If you want to restore to the factory setting from the projector, perform [Network setting initialization] from the menu. 112
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 113
    one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off the projector to cool its inside, and retry projection. If the same warning occurs again, the projector may be defective. Contact your dealer. Faulty lamp The lamp has burnt out
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 114
    control screen appears. Controlled items: [Power]: Turn ON/OFF the projector (P42, P62) [Input]: Select an input signal (P47) [Aspect]: Select an aspect ratio (P55) [Image mode]: Select an image mode (P61) [Blank]: Blank out the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 115
    Appendix Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 115
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 116
    Troubleshooting WARNING Lamp Flash Patterns The WARNING lamp on the Control Panel flashes in red when there is a trouble in the projector. • Turn off the projector, wait until the cooling fan stops, and disconnect the power plug from the AC outlet before dealing with the trouble. Flash Pattern One
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 117
    blocked and the internal temperature of the projector is increased. When the safety device is active, the POWER lamp does not turn on when you problem in the computer. Countermeasure Check whether the projector is connected to the computer or AV equipment correctly. (P34, P47) When the projector
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 118
    Troubleshooting computer manufacturers. For more detailed information, refer to the User's Manual that came with your computer. Check whether the dual screen the MUTE button on the remote control. (P65) The volume level is adjusted to the Press the VOL button on the remote control or the VOL+ but
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 119
    Troubleshooting ■The projected image is blur. Cause The image is out of focus. The distance to the screen is too short. The projector is not placed straight in front of the screen. The projector projector rises and the power is automatically turned off to protect the projector. (The WARNING lamp
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 120
    the obstacle between the infrared remote receiver of the projector and the remote control or point the remote control to an obstacle-free path. Check whether the infrared remote receiver of the projector is exposed to direct sunlight or strong light of lighting apparatus. (P28) Check whether the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 121
    . • Never use volatile cleaning liquid or benzine, as these may damage the finish of the projector. • When using a chemical dust cloth, make sure to read the instructions thoroughly. • When cleaning the projector's lens, use a commonly available air blower or lens cleaning paper. The lens surface is
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 122
    the Air Filter Make sure to replace the air filter when replacing the lamp. Follow the following procedure when replacing the air filter. 1 Turn off the projector, disconnect the power plug from the AC outlet, and let the projector stand for at least 1 hour. Filter cover Air filter 2 Remove the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 123
    inner glass surface when you replace the lamp. Otherwise, the projector 's performance may degrade. • Make sure to handle the lamp carefully and correctly since it may explode if it is scratched or shocked. If a lamp explodes, follow the instructions under "If a Lamp Explodes" on page 16. • Do not
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 124
    from the AC outlet, and let the projector stand for at least 1 hour. 2 Loosen a screw with a flathead screw- driver and remove the lamp cover. 3 Loosen two screws, pull up the handle, and then remove the lamp. Handle Lamp cover Screw Screw 4 Fully insert a new lamp and secure it with two screws
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 125
    Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect (P55) and aspect (P59). To project an image on the whole screen, select the most appropriate screen aspect ratio and aspect according to the aspect ratio of the screen and input signal type.
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 126
    Relationship between Aspect and Screen Aspect Screen Screen Aspect Resolution of Com- Ratio Setting puter Screen WUXGA 16:10 WSXGA+, WSXGA 16:10 WXGA [4:3] 4:3 [4:3 D. image shift] UXGA 4:3 SXGA+, XGA, SVGA, VGA 4:3 SXGA 5:4 Object of Projection Project an image in a largest possible
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 127
    Relationship between Aspect and Screen Aspect When Projecting an Image from Image Software To project an image such as an image shot by a TV set, commercially available DVD software, or video camcorder (input signal [HDMI], [VIDEO], [COMPONENT]), select an aspect ratio according to the image
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 128
    .716 59.94 56.250 50.00 67.433 59.94 * The specifications in the table above are subject to change without notice. * This projector does not support any computer signal of which dot clock is 170 MHz or higher. * Use a full connected VGA cable in which all pins are connected; otherwise
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 129
    Relationship between Screen Size and Projecting Distance Height Height 16:9/16:10 Screen size (diagonal) 4:3 Screen size Width 16:10 diagonal 16:10 Width Height 40" 86 54 50" 108 67 60" 129 81 70" 151 94 80" 172 108 90" 194 121 100" 215 135 110" 237 148 120" 258 162
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 130
    interface for AV equipment. It can transmit non-compressed images and audio signals simultaneously. It supports digital contents copy-protected with the HDCP technology. The projector supports HDMI 1.3 standard (10-bit deep color). HDCP An abbreviation of High-bandwidth Digital Content Protection
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 131
    at the appropriate timing with reference to the synchronization signal within the image signal is required. This process is called the tracking. This projector can display an image properly by automatically adjust the tracking with the auto PC adjustment function even if there is a small difference
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 132
    data. The gamma correction function works effectively when portions of an image are obscure because they are too light or dark. This projector supports manual gamma correction and dynamic gamma correction which performs the gamma correction automatically. Gain (P88) A parameter that adjusts the
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 133
    6-axis color adjust (P90) The color adjustment function for an advanced user. You can adjust color balance and color level for 6 axis of RGB (red/green/blue) and CMY (cyan/magenta/ yellow) of the projected image to
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 134
    Projector Projection Display Model name WUX10 shift 10:0 (fixed) Light source 275W high-pressure lamp Screen size (projection Remote control, batteries for remote control, power cord, computer connection cable, component cable, carrying bag, lens cover, string for lens cover, User's Manual
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 135
    ■External View Specifications 41.4 mm (1.6") Appendix 61.5 mm (2.4") 336 mm (13.2") 114 mm (4.5") 48 mm (1.9") 284 mm (11.2") Screw Holes for installation of ceilingmount hanger (M4 x 6) 50 mm (2.0") 75 mm 75 mm (3.0") (3.0") 37 mm (1.5") 73 mm (2.9") 193 mm (7.6") 61.5 mm (2.4") ■
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 136
    Specifications ■Service Port (CONTROL) Pin assignment D-Sub 9-pin Communication format Communication ASPECT=ZOOM True size ASPECT=TRUE Get GET ASPECT Lamp mode Normal Quiet Get LAMP=NORMAL LAMP=SILENT GET LAMP Blank On BLANK=ON BLANK Blank Off BLANK=OFF
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 137
    Color adjustment 88 COMPONENT 40, 47 Component 131 Composite 130 Connecting the projector to the computer 35 Contrast 86 D D. ZOOM 66 D.SHIFT/KEYSTONE defaults 100 FOCUS 52 FREEZE 64 G Gain 88, 132 Gamma correction 87, 132 Guide 95 H HDCP 130 HDMI 38, 47, 130 HDMI IN terminal 27, 38
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 138
    projector to the computer 35 Connecting to AV equipment 38 Installation 17 IP address 104 K Key lock 94 Keystone 53 L LAMP 91 Lamp counter 98 Lamp mode 91 Lamp Projecting distance 31, 129 Projector on 84 P-TIMER 67 R Rear projection 32, 81 Register password 97 Remote control 24, 28, 94
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 139
    V Vertical pixels 78 Vertical position 77 VIDEO 39, 47, 130 VIDEO IN terminal 27, 39 VOL 65 W WARNING lamp 26, 116 Z ZOOM 51 Zoom (Aspect 59 Zoom (image size 51 Zooming an Image 66 Index Index 139
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 140
    Options • Replacement lamp Part No.: RS-LP04 • Ceiling-mount hanger Part No.: RS-CL07 • digital cable Part No.: LV-CA29 * This part is used to hang the projector from a ceiling. For more detailed information, refer to the instruction manual that comes with the ceiling-mount hanger RS-CL07. 140
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 141
    141
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 142
    Logo position Upper L P82 Upper R Center * Lower L Lower R No signal screen Black P83 Blue * User logo Screen when blank Black * P83 Blue User logo Projector on Skip P84 Canon logo * User logo Return Screen aspect 16:10 P84 16:9 4:3 16:9 D. image shift 4:3 D. image shift
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 143
    settings Register password Off On * Password input Model name Input signal Firmware Serial no. IP address Gateway address E-mail sender address E-mail recipient address Projector name System information ID P101 143 Lamp counter Return Reset (OK/Cancel) Network function Off * On Network
  • Canon 3288B002 | REALiS WUX10 User Manual - Page 144
    , Lake Success, NY 110421198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Table of Contents
Safety Instructions
Before Use
Projecting an Image
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Connecting the Projector to Network
Appendix
Index
ENG
MULTIMEDIA PROJECTOR
User’s Manual