Canon 3518B002 LV-7370 User Manual - Page 25
When Viewing a DVI Digital Signal
UPC - 013803108170
View all Canon 3518B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
AUDIO IN ANALOG IN-1 When Viewing a DVI Digital Signal 2. Installation and Connections To project a DVI digital signal, be sure to connect the PC and the projector using a DVI cable (not supplied) before turning on your PC or projector. Turn on the projector first and select Computer 2 (Digital) from the source menu before turning on your PC. Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen, restart your PC. Do not disconnect the DVI cable while the projector is running. If the signal cable has been disconnected and then re-connected, an image may not be correctly displayed. Should this happen, restart your PC. NOTE: • Use a DVI cable or the one compliant with the DDWG (Digital Display Working Group) DVI (Digital Visual Interface) revision 1.0 PHONE standard. The DVI cable should be within 5 m (196) long. Both single and dual types of DVI cable can be used. • The DVI (DIGITAL) connector accepts VGA (640x480), SVGA (800x600), 1152x864, XGA (1024x768), WXGA (1280x800 @ up to 60Hz), and SXGA (1280x1024 @ up to 60Hz). Audio cable (not supplied) AUDIO IN PHONE DVI cable (not supplied) DIGITAL IN/ ANALOG IN-2 IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type) • Select the input name for its appropriate input connector after turning on the projector. Input connector Use the INPUT button on the projector cabinet or the remote control to select the appropriate input from the menu. DIGITAL IN / ANALOG IN-2 Computer 2 (Digital) 16