Canon 3519B002 LV-7370 User Manual - Page 33
Projecting an Image Basic Operation
UPC - 013803108149
View all Canon 3519B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. ❶ Turning on the Projector NOTE: • The projector has two power switches: a main power switch and a POWER ( ) button. • When plugging in or unplugging the supplied power cord, make sure that the main power switch is pushed to the off () po- sition. Failure to do so may cause damage to the projector. 1. To turn on the main power to the projector, press the Main Power switch to the on position ( I ). • The projector will go into standby mode. When in standby mode, the POWER indicator will light orange and the STATUS indicator will light green to show that [Normal] mode is selected for [Standby mode]. 2. Remove the lens cover. 3. Press the POWER ( ) button on the projector cabinet or the POWER ( ) button on the remote control for about 1 second. The STATUS indicator goes off and the POWER indicator starts blinking. When the POWER indicator turns a steady green, and the projector is ready to use. POWER INFO. IMAGE INPUT AUTO PC ASPECT MENU BLANK TIP: When the STATUS indicator lights orange, it means that the [Key lock] is turned on. See page 60. • When the message "Projector is locked! Enter your password." is displayed, it means that the [Password] is turned on. See page 38. After you turn on your projector, ensure that the computer or video source is turned on and that your lens cover is removed. Standby Blinking Steady orange Blinking light green light See page 72 for more details. Power On Steady green light 24