Canon 3622B002 User Manual - Page 125
Feeding Option, Batch Separation, Standard Feeding], Manual Feeding] Separation Off, Panel-Feeding]
View all Canon 3622B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Chapter 8 ISIS/TWAIN Driver Settings IMPORTANT If the documents overlap by less than 1.97" (50 mm), or if the documents cling (such as from static electricity), ultrasonic detection of double feeds may not word correctly. Feeding Option You can select the feeding method for document scanning. [Standard Feeding] Load a document and then start scanning with an application program. Scanning stops when the loaded document has been scanned. [Manual Feeding] (Separation Off) This is linked to the [Separation Off] key on the control panel. When [Manual Feeding] is selected, the [Separation Off] key is lit and the Document Feed Tray is raised up. Start scanning with an application program and feed documents manually one at a time. The scanner detects a document and then scans it. Press the stop key to stop scanning. Hint If you press the [Separation Off] key on the control panel, the feeding option changes to [Manual Feeding]. [Panel-Feeding] Start scanning with an application program, load a document, and then press the start key to start the scan operation. The scanner enters a waiting state when the document has been scanned, and then continues scanning when you load the next document and press the start key. When all of the documents have been scanned, press the stop key to stop scanning. Hint When using the panel feeding mode to scan documents with different-size pages, you can adjust the document guide position after loading a document. [Automatic Feeding] Execute scanning with an application. The scanner starts scanning when it detects a document loaded in the Document Feed Tray. The scanner enters a waiting state when the document has been scanned, and then continues scanning when it detects the next document. When all of the documents have been scanned, press the stop key to stop scanning. [Setting] Button This button is enabled when [Automatic Feeding] is selected, and allows you to set the delay time from when a loaded document is detected until scanning starts. Batch Separation Items available for selection depend on the Feeding Option setting: select batch separation timing (for when to start scanning) according to the batch separation capabilities provided by the application program. [Standard Feeding] feeding option, batch separation is not available [Manual Feeding] Feeding Option 8-20