Canon 4231B005 REALiS WUX10 Mark II User Manual - Page 99
Turning on/off LED Illumination, Extending the Menu Display Time, POWER, WARNING
View all Canon 4231B005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Turning on/off LED Illumination [LED illumination] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings LED illumination You can select whether to enable or disable the LED illumination (P28). Setting Various Function Extending the Menu Display Time [Other settings] - [Menu display time] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings Other settings Menu display time You can extend the menu display time, which is 30 seconds usually, to 3 minutes. Setting Up Functions from Menus Off Disables the LED illumination. On Enables the LED illumination. Press the OK button to accept your setting and then press the MENU button. • [On] is the factory default. • LED illumination is unrelated to turning on/off of the POWER or WARNING lamp. Normal The menu is displayed for 30 seconds. Extended The menu is displayed for 3 minutes. Press the OK button to accept your setting and then press the MENU button. • [Normal] is the factory default. • The following display and operation are also changed. Item [Normal] [Extended] The display time of the following screens • INPUT (P50) • Zoom adjustment (P53) • Focus adjustment (P54) • Keystone adjustment (P55) • Keystone reset (P56) • D.image shift adjustment (P59, P60) • D.image shift reset (P60) • Aspect (P62) • Image mode (P63) • Volume adjustment (P67) • Lamp mode (P93) 4 to 10 seconds 3 minutes The pointer buttons holding operation other than in [Zoom adjustment] and [Focus adjustment]. The VOL button holding operation. The D.ZOOM button holding operation. Enabled Disabled Beep at end of [Auto setup] (P48) No Yes 99