Canon 450X re450x_manual.pdf - Page 8
Operation Panel - set up
![]() |
UPC - 013803009774
View all Canon 450X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Operation Panel LIGHTS button/indicator Use this button to turn ON the illumination lamps for reflection copies. The indicator flashes during preheating, and stays lit after preheating. BACK LIGHT button/indicator Use this button to turn ON the backlight for transparencies (see page 12). The indicator lights up when the backlight is used. DETAIL control Use this control to adjust picture quality (see page 14). Turn the control to the HARD side to emphasize the outline, turn to the SOFT side for softer outline. INPUT SELECT button/indicator Use this button to select input source to switch between pictures via internal input (the unit's camera head) and pictures via external input (such as a computer) (see page 16). The indicator lights up when external input equipment is selected. FOCUS buttons/indicator Use this button to focus (see page 12). To focus manually, press the FOCUS button and then the NEAR button or the FAR button. WHITE BALANCE button/indicator/control Use this button/knob to adjust color tone (see page 13). To adjust manually, press the WHITE BLANACE button and turn the WHITE BALANCE knob. Turn the knob to the RED side to increase red tone, or turn the knob to the BLUE side to increase blue tone. ZOOM buttons Press the WIDE button to change the picture to wide-angle. Press the TELE button to change the picture to telephoto. POWER LIGHT BACK INPUT LIGHT SELECT WHITE BALANCE AUTO MANUAL RED BLUE EXPOSURE WHITE PAPER LOW HIGH DETAIL SOFT HARD AUTO FOCUS MANUAL NEAR FAR ZOOM ZOOM PRESET STILL PICTURE WIDE TELE POWER indicator Lights up when the power is ON (see page 11). WHITE PAPER button/indicator Use this button to make a paper document on the table appear whiter. The indicator lights up when this function is on. EXPOSURE control Use this knob to adjust image brightness (see page 14). To increase brightness, turn the knob to the HIGH side. To decrease brightness, turn the knob to the LOW side. Brightness may not be adjusted effectively using the EXPOSURE knob if the image is too dark. 7 ZOOM PRESET button/indicator Press the ZOOM PRESET button to set the angle for letter/A4 size paper (see page 13). The indicator lights up when the button is pressed. STILL PICTURE button/indicator Press the STILL PICTURE button to freeze a moving output image. When the button is pressed again, the moving picture will start running again (see page 13). The indicator lights up when the picture is frozen. The illumination lamps and the backlight cannot be used at the same time.
![](/manual_guide/products/canon-450x-re450xmanualpdf-1ee8080/8.png)