Canon 5060F Instructions for Use - Page 66
Feeding Option, Verify Scan
View all Canon 5060F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
MEMO q Double feed detection is performed taking the thickness and length of the first sheet of the document as the standard sheet. When the first sheet of the document is fed, the scanner memorizes the thickness and length of the document. q Double feed cannot be detected on originals 130 mm (5.0 in.) wide or less. Feeding Option Selects the feed method. [Remote] The document starts to be fed (scanned) when you load the document and instruct scanning in the application. [Semi Auto] The document is fed (scanned) when scanning is instructed in the application and when you load the document and press the Start key. [Auto] The document is fed (scanned) automatically when scanning is instructed in the application and you load the document. [Manual] The document is fed manually one page at a time after scanning is instructed in the application. Use this when scanning particularly thick or thin pages. MEMO The setting you make here is reflected in the scanner's operation panel when you press the [OK] button in the Scanner Settings dialog box and the dialog box is closed. It is also reflected in the Feeder Option panel when the setting is changed on the operation panel. Verify Scan Verify the number of pages counted before the document is scanned against the actual number of scanned pages. If the numbers differ, an error is displayed. For details on the verify scan procedure, see "Verify Scan" p.45. To perform a verify scan, mark the Verify Scan check box. [Default] button Returns the settings in the Feeder Option panel to their defaults. [OK] button Enables the settings and closes the dialog box. [Cancel] button Cancels any settings you have set, and closes the dialog box. 64 Setting Scan Conditions