Canon 70 MC ZR70 ZR65 Instruction Manual - Page 146
Recording, Playback
UPC - 013803024128
View all Canon 70 MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Recording Problem Cause Solution Image will not appear Camcorder is not set to Set the camcorder to 28 E on the screen. CAMERA mode. CAMERA mode. "Set the time zone, date Time zone, date and time Set the time zone, date and 25 and time" appears on are not set, or the backup time, or replace the backup the screen. battery is exhausted. battery and reset the date and time. Pressing the start/stop button will not start recording. Camcorder is turned off. Cassette is not loaded. Tape reached the end ( flashes on the screen). Turn on the power. 28 Load a cassette. 22 Rewind the tape or replace 22 the cassette. Cassette is protected (v flashes on the screen). Replace the tape or change 23 the position of the protect switch. Camcorder is set to a mode Set the camcorder to 28 other than the CAMERA mode. CAMERA mode. Camcorder will not Autofocus does not work on Focus manually. 75 focus. that subject. Viewfinder is not adjusted. Adjust the viewfinder with 20 the diopter adjustment lever. Lens is dirty. Clean the lens. 141 A vertical light bar Bright light in a dark scene - appears on the screen. may cause a vertical light bar (smear) to appear. This is --- not a malfunction. Sound is distorted or When recording near loud - recorded in a lower sound (such as fireworks, volume than the actual drums or concerts), sound volume. may become distorted or - - - may not be recorded in the actual sound level. This is not a malfunction. Viewfinder picture is blurred. Viewfinder is not adjusted. Adjust the viewfinder with 20 the diopter adjustment lever. Playback Pressing the playback button does not start Camcorder is turned off, or is Set the camcorder to PLAY 37 not set to PLAY (VCR) mode. (VCR) mode. playback. Cassette is not loaded. Load a cassette. 22 Tape reached the end ( Rewind the tape. 37 flashes on the screen). Additional Information Image will not appear on the TV screen. [AV/PHONES] is set to [PHONESH] in the menu. Set [AV/PHONES] to [AV] in 39 the menu. [AV / DV OUT] is set to [ON]. Set [AV / DV OUT] to [OFF]. 93 Tape is running, but TV/VIDEO selector on the TV Set the selector to VIDEO. 42 image will not appear is not set to VIDEO. on the TV screen. Video heads are dirty. Clean the video heads. 142 You attempted to play back Stop playback/dubbing. 91 or dub copyright protected tape. No sound from the built- Speaker volume is turned 146 in speaker. off. Adjust the volume with the 40 selector dial.