Canon 7215 LV-CL08_Instruction.pdf - Page 6

LV-CL08) 03.8.26 7:40 PM ページ6 Fig. 1 Assembly z Screw (B) Plus screw with round head M4 x 40 (1 pc.) with spring washer and flat washer Screws (A) Plus screw with round head M4 x 12 (3 pcs.) with spring washer and flat washer Main body mounting fitting (1 pc.) Projector main body x Adjuster 1. Pull out the adjuster from the projector main body. Wire (included in package) Wire clamp 2. Hang securely the drop prevention wire included in the package to the adjuster in the main body (2 positions). 3. Tighten securely the wire clamp with the drop prevention wire, and push down the adjuster in the main body. A Screws (included in package) 4. Attach the drop prevention wire to the main body mounting fitting with two A screws (M4 x 12 mm) included in the package. Attach the drop prevention wire on the opposite side in the same way. Measures to prevent the projector from falling * Make sure to take measures to prevent the projector main body from falling as explained here. c Ceiling hanging fitting Main body mounting fitting v Fix securely the main body mounting fitting to the ceiling hanging fitting with four A screws (M4 x 12 mm) included in the package. 2