Canon 7215 lv7210_series_basic_cmd.pdf - Page 19
State Read Command, Format, Transfer Example, Details for Response, 00 [CR], Projector, R 1, Shows
View all Canon 7215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Basic Serial Functional Specification for LV-5210/7215/7210 7 State Read Command 7.1 Format 7.1.1 A PC issues commands fin format as below. "CR" COMMAND [CR] Command: 1 character (See Status Read Command Table) 7.1.2 When a projector receives the appropriate command, it returns a character line as the required data. Required Data [CR] Required Data: A character line (See Basic Status Read Command Table) When receiving data cannot be decode, the projector returns, ""?" [CR]. 7.2 Transfer Example Get input mode for the projector by basic commands. Command (current input mode command issue) PC → Projector "C" "R" "1" CR Projector → PC "1" CR Response (a few ms - 1s) (Shows Computer 1 is selected) 7.3 Status Read COMMAND COMMAND "CR0" [CR] Detail Get the projector status Acceptable "%1" [CR] Response "00" = POWER ON "80" = STANDBY "40" = Processing Count Down "20" = Processing Cooling Down "10" = Power Failure %1 "28" = Processing cooling down due to abnormal temperature "08" = Abnormal Temperature "88" = normal after recovering abnormal temperature "02" = cannot accept RS232C command "24" = Processing Power Save・Cooling Down "04" = Power Save Unacceptable "?" [CR] 【Details for Response】 7.3.1 "00" [CR] Status: POWER ON The image is displayed normally. Page 19