Canon 7611A001 S330 Easy Setup Instructions - Page 1

1 Unpack the Printer 1 Carefully remove all items from the box. 2 Prepare the Printer 1 Remove the shipping tape from the front and sides of the printer. S330 Series Color Bubble Jet Printer Shipping Tape 2 Plug the power cord into the back of the printer and connect the other end to a power outlet. Paper Rest Output Tray Start Here Easy Setup Instructions 3 Install the Print Head 1 Remove the print head from its package. 2 Turn the print head over, then remove the orange protective cap. NOTE: Do not touch the electrical contacts. Electrical contacts 4 Install the Ink Tanks 1 Remove the black ink tank (BCI-24 Black) from its packaging and pull off the orange protective cap. Protective cap NOTE: To avoid spilling ink, do not touch the bottom of the tank once you have removed the protective cap. Color Bubble Jet Printer S330 5 Connect the Printer To Your Computer 1 Turn the printer off. IMPORTANT: Be sure printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. 2 Connect one end of a USB cable (not included) to the computer, the other to the printer. 2 Insert the black ink tank into the slot on the right. Press down until the ink tank locks into place. 3 Press the POWER button. POWER Button POWER Lamp 3 Raise the gray lock lever. Documentation and Software Kit S330 Print Head Power Cord 4 Open the front cover. The print head holder automatically moves to the center. 4 Slide the print head into the holder until it is securely seated. Do not press it down. 3 Repeat the procedure for the color ink tank (BCI-24 Color), inserting it into the remaining slot. 4 Close the front cover and attach the paper rest and output tray. USB Cable USB Port Ink Tanks BCI-24 Black BCI-24 Color Serial number 5 Write down the serial number located to the right of the print head. You will need this later to register the product. 5 Lower the lever until it locks into place. Continue with Step 6 on side two.