Canon 7908A001BB Reference Guide - Page 109

Getting Started The machine does not enter the Energy Saver mode in the following cases: • If documents are stored in memory • If a document or paper jam has occurred, the paper cassettes have run out of paper, or if the toner cartridge has run out of toner • If a document has been fed into the ADF (Automatic Document Feeder) • If you set the machine to print an Activity Management report at a preset time • If the machine is set to poll another machine within three minutes or less, or is receiving a document by preset polling 2 NOTE • While the machine is powering up, you can perform any operation. • To put the machine into the Energy Saver mode manually, press (Energy Saver). Setting the Daily Timer This section describes the procedure to set the time that the machine automatically enters the Energy Saver mode for each day of the week. NOTE If the current date and time are not set correctly, the Daily Timer will not function correctly. Data Registration Set 1 Open all three one-touch speed dialing panels © press [Data Registration] © [M] or [L] until appears © press [Set]. If necessary, see steps 1 to 3 of "Turning the Energy Saver Feature ON," on p. 2-37. Set 2 Press [M] or [L] until appears © press [Set]. © Using the Energy Saver Mode 2-39 CF-PL Reference Guide_USEN HT1-2187-000-V.1.0